null

Router Tables

Router Tables

  • ALUMINUM ROUTER TABLE INSERT PLATE 9IN. X12
    Pre-Order Now

    ALUMINUM ROUTER TABLE INSERT PLATE 9IN. X12

    CAD $99.99
    B3494 Aluminum Router Table Plate Insert Our 1/4" thick aluminum router table insert will support the heaviest of routers, without plate sag. The plate is about 9" x 12" and includes levelling screws and magnets to secure the plate in the table...
    B3494
    CAD $99.99
    Pre-Order Now
  • UNIVERSAL FEATHERBOARD MAG SWITCH
    Add to Cart

    UNIVERSAL FEATHERBOARD MAG SWITCH

    CAD $91.00
    B3028 Universal Feather Board - MAG SWITCH Works On Both Sides Of The Blade, And Even The Fence. Low profile and double sided, this is the ultimate featherboard from Magswitch. Works to improve your cutting results on either side of the blade. Also...
    B3028
    CAD $91.00
    Add to Cart
  • KREG PRECISION ROUTER TABLE INSERT PLATE
    Add to Cart

    Kreg

    KREG PRECISION ROUTER TABLE INSERT PLATE

    CAD $89.99
    PRS4038 Precision Router Table Insert Plate - Undrilled Solid, Flat, and Perfectly Level Mounting Surface  This rugged 3/8" thick (9mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your...
    PRS4038
    CAD $89.99
    Add to Cart
  • ROUTER SPEED CONTROL 115V 15A
    Add to Cart

    ROUTER SPEED CONTROL 115V 15A

    Now: CAD $74.99
    Was: $79.99
      This unit provides full variable speed control on your single speed router or laminate trimmer. This control is equipped with a 3 position switch that allows you to operate your router at full speed or variable speed settings, as well as control...
    B1850
    Now: CAD $74.99
    Was: $79.99
    Add to Cart
  • SWING STOP KREG
    Add to Cart

    Kreg

    SWING STOP KREG

    CAD $59.99
    KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.
    KMS7801
    CAD $59.99
    Add to Cart
  • ROUTER COLLET EXTENDER 1/2IN. B3667
    Add to Cart

    ROUTER COLLET EXTENDER 1/2IN. B3667

    CAD $47.99
    B3667 It's often impossible to raise a router bit high enough on table mounted routers so the addition of a router collet extension to your setup makes it possible on 1/2" collet routers. (Wrenches are not included.) Specifications: 1/2" shank 1/2"...
    B3667
    CAD $47.99
    Add to Cart
  • POWER TOOL HOSE KIT WITH FITTINGS (B3838)
    Add to Cart

    POWER TOOL HOSE KIT WITH FITTINGS

    CAD $37.99
    This 10’ flexible hose kit is just what you need in the shop where you have multiple tools with varying dust collection port sizes. The 4 different-sized adaptors allow you to hook up many different machines to your vacuum or dust collection system...
    B3838
    CAD $37.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/2IN.
    Add to Cart

    SLICK PLATE 36IN. X 4IN. X 1/2IN.

    CAD $36.99
    B237712 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router ...
    B237712
    CAD $36.99
    Add to Cart
  • FEATHER BOARD SAFETY 5 PC SET
    Add to Cart

    FEATHER BOARD SAFETY 5 PC SET

    CAD $29.99
    B3276 5pc Featherboard Safety Set The 5-piece shop safety kit allows you to keep your hands safe from table saw, router table, shaper table and jointer while operation. INCLUDES two push stick one push block one notch stick one featherboard
    B3276
    CAD $29.99
    Add to Cart
  • PRECISION ROUTER TABLE INSERT LEVELERS
    Add to Cart

    PRECISION ROUTER TABLE INSERT LEVELERS

    CAD $28.99
    PRS3040 Precision Router Table Insert Plate Levellers - KREG 8 adjustable points of contact Four-corner lock-downs Locating tabs for easy installation Package includes 4 Insert Plate Levellers Designed for 3/4" corner radius Works with router tables up...
    PRS3040
    CAD $28.99
    Add to Cart
  • ROUTER TABLE INSERT
    Add to Cart

    ROUTER TABLE INSERT B2465

    Now: CAD $28.68
    Was: $59.99
    Router Table Insert 3/8” phenolic plate with inserts for 1 1/4”, 2 5/8”, and 3 7/8” openings. Size 9” x 12”
    Clearance
    B2465
    Now: CAD $28.68
    Was: $59.99
    Add to Cart
  • 3/8IN. FENCE FLIP STOP
    Add to Cart

    3/8IN. FENCE FLIP STOP

    CAD $27.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4152
    CAD $27.99
    Add to Cart
  • 1/4IN. FENCE FLIP STOP
    Add to Cart

    1/4IN. FENCE FLIP STOP

    CAD $27.99
    Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of the longer piece before final cut to length. Requires a minimum fence height of 2-5/16"...
    B4151
    CAD $27.99
    Add to Cart
  • DELUXE FEATHER BOARD WITH T SLOT HOLDER
    Pre-Order Now

    DELUXE FEATHER BOARD WITH T SLOT HOLDER

    CAD $21.99
    B3260 Retrofit Featherboard Kit with T-slot Holder Featuring two T-slot locking nuts with knobs, this high quality retrofit feather kit quickly attaches to your working surfaces and stays put when the knobs are tightened. Great for router tables, table...
    B3260
    CAD $21.99
    Pre-Order Now
  • SLICK PLATE 36IN. X 4IN. X 1/4IN.
    Add to Cart

    SLICK PLATE 36IN. X 4IN. X 1/4IN.

    CAD $20.99
    UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...
    B237714
    CAD $20.99
    Add to Cart
  • SLICK PLATE 36IN. X 3/4IN. X 3/8IN.
    Add to Cart

    SLICK PLATE 36IN. X 3/4IN. X 3/8IN.

    CAD $15.99
    B2378 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits...
    B2378
    CAD $15.99
    Add to Cart
  • GAUGE 2 IN 1 ROUTER / TABLE SAW
    Add to Cart

    GAUGE 2 IN 1 ROUTER / TABLE SAW

    CAD $14.99
    2 in 1 Router Depth & Saw Gauge This 2 in 1 gauge is really an all in one gauge as it can be used to set up table saws, band saws and routers in a quick and efficient manner. Step gauge from 1/8" to 2" Router depth gauge from 1/8" to 1"
    B2386
    CAD $14.99
    Add to Cart
  • SLICK PLATE 36IN. X 4IN. X 1/8IN.
    Pre-Order Now

    SLICK PLATE 36IN. X 4IN. X 1/8IN.

    CAD $13.99
    UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...
    B237718
    CAD $13.99
    Pre-Order Now
  • ROUTER BIT DEPTH GAUGE
    Add to Cart

    ROUTER BIT DEPTH GAUGE

    CAD $13.99
    Router Bit Depth Gauge You're all set to rout V-groove into a piece of expensive stock. How can you be sure the depth you've set is the depth the router will cut? Simple. Check it with this handy router depth gauge. The guide is clearly marked in 16ths...
    B1309
    CAD $13.99
    Add to Cart
  • 2 1/2IN. ROUTER DUST PORT DUST COLLECTION
    Add to Cart

    2 1/2IN. ROUTER DUST PORT DUST COLLECTION

    CAD $6.99
    D42372-1/2" Router Dust Port - WoodstockThis 2-1/4-inch Router Dust Port will collect chips and dust right at the router table.Specifications:Collect chips and dust right at the router tableEasily mounts to router table or shaper tablePort size measures...
    D4237
    CAD $6.99
    Add to Cart

Router Tables

A router table is a must-have in every wood craftsman's workshop. If you find yourself working with smaller sized wood projects, Busy Bee has a selection of router tables that will help you get the job done with precision and expert craftsmanship.

You'll find the top brands of router tables in stock, such as Kreg and Felisatti, along with Busy Bee's own quality Craftex brand. You can choose from table top and bench top router tables, as well as router table fences and all the accessories you'll need to handle a multitude of projects.

Count on Busy Bee Tools for all your precision router table needs. If there is something you want but can't find, let us know and we'll locate it for you at the lowest possible price.

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley