FUJI ACCESSORIES

FUJI ACCESSORIES

  • AIRCAP SET NO. 2 0.7MM FOR XPC N GXPC GUN

    Fuji Spray

    AIRCAP SET NO. 2 0.7MM FOR XPC N GXPC GUN

    $83.99
    0.7mm Aircap Set #2 Finest 0.7mm (0.027") size Aircap set for finest atomization. It is suitable for inks, shading and mist coats. For Xpc Spray gun only and does not fit older Fuji Spray gun.
    80502
    $83.99
    Add to Cart
  • AIRCAP SET NO. 3 1MM FOR XPC N GXPC GUN

    Fuji Spray

    AIRCAP SET NO. 3 1MM FOR XPC N GXPC GUN

    $83.99
    1mm Aircap Set #3 Fine 1mm (.039") size aircap set for finer atomization. It is suitable for most water-based lacquers and shading. For Xpc Spray gun only and does not fit older Fuji Spray guns
    80503
    $83.99
    Add to Cart
  • WHIP HOSE

    Fuji Spray

    FUJI WHIP HOSE 6FT

    $46.99
    2049F Flexible Whip Hose - Fuji Lightweight 6ft. hose is highly flexible. Couplings are made from a glass fiber-reinforced polymer. Takes weight off the wrist and the flexibility allows for effortless manoeuvrability of the spray gun. An added feature...
    2049F
    $46.99
    Add to Cart
  • PRESSURE TUBE/CHECK VALVES 5

    Fuji Spray

    PRESSURE TUBE/CHECK VALVES 5

    $23.99
    20245 Check Valves, 5-Pack - FUJI Industrial spray check valve with one-way duck-bill design Helps prevent paint from entering spray gun from cup Each valve comes with attached pressure tube Designed to fit older Fuji spray guns 5-pack
    20245
    $23.99
    Add to Cart
  • MINI 3 CUP SET

    Fuji Spray

    MINI 3 CUP SET

    $64.99
    9080 Mini 3-Cup Set - FUJI SPRAY Complete 1/2pint (8ozs) miniature cup assembly. Supplied with 2 extra cups and 3 heavy-duty lids equipped with gaskets. This assembly is lightweight taking weight off the wrist. The small size allows access into...
    9080
    $64.99
    Add to Cart
  • AIR CONTROL VALVE FUJI

    Fuji Spray

    AIR CONTROL VALVE FUJI

    $4.99
    Air Control Valve - FUJI This air control valve connects between the hose and the brass quick connect and controls the air flow. It limits the cfm/pressure to the gun reducing the bounce back and over spray.
    2032
    $4.99
    Add to Cart
  • CUP PARTS KIT 3X2024 3X2037 3X2038 FUJI

    Fuji Spray

    CUP PARTS KIT 3X2024 3X2037 3X2038 FUJI

    $31.99
    2039 Cup Parts Kit - FUJI The Q systems' maintenance kit consists of: The diaphragm kit, which contains 3 pressure tubes with check valves in them.  The check valves prevent the finish from backing up into the spray gun, and 3 extra cup gaskets...
    2039
    $31.99
    Add to Cart
  • AIRCAP SET NO. 4 1.4MM FOR XPC N GXPC GUN

    Fuji Spray

    AIRCAP SET NO. 4 1.4MM FOR XPC N GXPC GUN

    $83.99
    1.4mm Aircap Set #4 Standard 1.4mm (.055") is installed in all Xpc Sprayguns. This air cap set is perfect for most fine finishing. Especially suitable for automotive enamels, nitrocellulose lacquers, catalyzes lacquers and latex (emulsion) where finer...
    80504
    $83.99
    Add to Cart
  • FILTER MINI MITE 2

    Fuji Spray

    FILTER MINI MITE 2 PLATINUM

    $9.50
    40092 2 Mini Mite Turbine Filters - Fuji Spray Turbine filters fit all Mini-Mite Model Turbines. Coarse filter goes on the right hand side (as seen when looking at the front of the case) fine filter on the left. Please note these filters will not fit...
    40092
    $9.50
    Add to Cart
  • AIRCAP SET NO. 5 1.8MM FOR XT N GXT GUN

    Fuji Spray

    AIRCAP SET NO. 5 1.8MM FOR XT N GXT GUN

    $83.99
    90015 5-1.8mm Air Cap Set for XT & GXT Spray Guns 0.071-inch nozzle size provides very fine atomization and it is suitable for use with most water-based lacquers, stains, and shading. Complete needle, nozzle, and jet kit; needle and nozzle made of...
    90015
    $83.99
    Add to Cart
  • U TUBE 400CC GRAVITY CONVERSION KIT FUJI

    Fuji Spray

    U TUBE 400CC GRAVITY CONVERSION KIT FUJI

    $65.99
    9960 Gravity Cup Conversion Kit - FUJI SPRAY This conversion kit includes a U-Tube accessory to convert any Fuji Spray Gun Bottom Feed to a Gravity style. It can also be used with other Spray guns. Includes 400cc Aluminum Gravity Cup, Stainless Steel...
    9960
    $65.99
    Add to Cart
  • GRAVITY CUP ONLY 400CC FUJI

    Fuji Spray

    GRAVITY CUP ONLY 400CC FUJI

    $63.99
    9850 400cc Gravity Cup Assembly - FUJI SPRAY Includes 400cc cup, #2024L pressure tube and cup lid. For XPC Series gravity feed guns.
    9850
    $63.99
    Add to Cart
  • GRAVITY CUP PARTS KIT FUJI

    Fuji Spray

    GRAVITY CUP PARTS KIT FUJI

    $37.99
    2030 400cc Gravity Cup Parts Kit - FUJI 400cc Gravity Cup Parts Kit provides handy wearable parts to always have on hand Contains five 9050 400cc Gravity Cup Gaskets Contains five 2024L Long Pressure Tubes with Check Valves
    2030
    $37.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley