Mitre Gauges and Tracks

Mitre Gauges and Tracks

  • TRACK CLAMP KREG

    Kreg

    TRACK CLAMP KREG

    $21.99
    KMS7520 Track Clamp - KREG Track Clamps from Kreg make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy to use clamps lock into place on the underside of the Accu-Cut track and starting block to offer additional holding...
    KMS7520
    $21.99
    Add to Cart
  • ALUMINUM MITER TRACK 32IN. P294402

    ALUMINUM MITER TRACK 32IN. P294402

    $15.99
    B3262 32" Aluminum Miter Track Works with standard 3/4" x 3/8" miter gauges with or without T-slot Slides into miter track or miter slot on your table saw Use on table saw extensions, drill press tables & band saw tables Features 5 pre-drilled...
    B3262
    $15.99
    Add to Cart
  • TRACK T 24IN. ALLUMINUM WITH 2 HOLD DOWN

    TRACK T 24IN. ALLUMINUM WITH 2 HOLD DOWN

    Now: $27.99
    Was: $29.99
    24" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...
    B238424
    Now: $27.99
    Was: $29.99
    Add to Cart
  • UTILITY TRACK 12IN.

    UTILITY TRACK 12IN.

    Now: $7.99
    Was: $9.99
    Utility Track 12" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount
    B2527
    Now: $7.99
    Was: $9.99
    Add to Cart
  • HOLD DOWN FOR T TRACK

    HOLD DOWN FOR T TRACK

    $11.99
    Hold Down T-Track Solid aluminum with large T-Knob fits any slot which holds the head of 1/4" - 20 bolt. Hold stock upto 2" thick.
    B2530
    $11.99
    Add to Cart
  • MITRE GAUGE 1000SE INCRA

    Incra

    MITRE GAUGE 1000SE INCRA

    Now: $205.00
    Was: $215.00
    MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...
    MITER1000SE
    Now: $205.00
    Was: $215.00
    Add to Cart
  • UTILITY TRACK 24IN.

    UTILITY TRACK 24IN.

    $9.99
    Utility Track 24" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount
    B2528
    $9.99
    Add to Cart
  • TRACK T ALLUMINUM 36IN. WITH 2 HOLD DOWN

    TRACK T ALLUMINUM 36IN. WITH 2 HOLD DOWN

    Now: $29.99
    Was: $45.00
    36" Aluminum T-Track Set With 2 Hold-Downs Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time. Each set includes one track and hold-downs. Each hold-down includes a knob and 1/4"-20 sliding bolt. Hold-downs...
    B238436
    Now: $29.99
    Was: $45.00
    Add to Cart
  • MITRE SLIDE 24IN. INCRA

    Incra

    MITRE SLIDE 24IN. INCRA

    Now: $28.99
    Was: $36.99
    INCRA MITER SLIDER 24" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...
    IMS2
    Now: $28.99
    Was: $36.99
    Add to Cart
  • MITRE GAUGE 1000 INCRA

    Incra

    MITRE GAUGE 1000 INCRA

    Now: $155.00
    Was: $182.99
    MITER100018T INCRA MITER GAUGE 1000 If you are looking for a great combination of basic affordability combined with unbeaten accuracy, the INCRA Miter 1000 is a terrific choice. We combined a solid-steel laser cut protractor head with a gold anodized...
    MITER100018T
    Now: $155.00
    Was: $182.99
    Add to Cart
  • TTRACK PLUS 24IN. W/ADJ. LEXAN SCAL INCRA

    Incra

    TTRACK PLUS 24IN. W/ADJ. LEXAN SCAL INCRA

    Now: $15.99
    Was: $17.99
    TTRACKPLUS24 24" T-Track Plus With Adjustable Lexan Scale - Incra Large T-Slot accepts standard 1/4-20 hex bolts and nuts Adjustable Lexanr scale Mount easily with pre-drilled holes and included fasteners Hard anodized aluminum for durability
    TTRACKPLUS24
    Now: $15.99
    Was: $17.99
    Add to Cart
  • MITRE GAUGE V27 INCRA

    Incra

    MITRE GAUGE V27 INCRA

    Now: $83.99
    Was: $95.00
    INCRA MITER GAUGE V27 The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter...
    MITER27
    Now: $83.99
    Was: $95.00
    Add to Cart
  • MITER EXPRESS INCRA

    Incra

    MITER EXPRESS INCRA

    Now: $209.00
    Was: $235.99
    MITEREXPRESS INCRA MITER GAUGE EXPRESS The NEW Incra Miter Express Makes Safe and Easy Mitered Cuts Incra's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Turn any miter...
    MITEREXPRESS
    Now: $209.00
    Was: $235.99
    Add to Cart
  • TTRACK PLUS 48IN. W/ADJ. LEXAN SCAL INCRA

    Incra

    TTRACK PLUS 48IN. W/ADJ. LEXAN SCAL INCRA

    Now: $26.99
    Was: $28.99
    TTRACKPLUS48 48" T-Track Plus With Adjustable Lexan Scale - Incra Large T-Slot accepts standard 1/4-20 hex bolts and nutsAdjustable Lexanr scaleMount easily with pre-drilled holes and included fastenersHard anodized aluminum for durability
    TTRACKPLUS48
    Now: $26.99
    Was: $28.99
    Add to Cart
  • MITRE SLIDE 18IN. INCRA

    Incra

    MITRE SLIDE 18IN. INCRA

    Now: $19.99
    Was: $27.99
    INCRA MITER SLIDER 18" This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners. - A simple turn of a screw adjust Miter Slider for ZERO...
    IMS1
    Now: $19.99
    Was: $27.99
    Add to Cart
  • UTILITY TRACK 36IN.

    UTILITY TRACK 36IN.

    Now: $7.99
    Was: $16.99
    Utility Track 36" This Jig Making T Track from Craftex allows you to create your own shop jigs Solid aluminum construction May be mounted with screws or epoxy Uses standard 1/4" - 20 hex bolts 3/4" x 3/8" requires 3/4" material for flush mount
    B2529
    Now: $7.99
    Was: $16.99
    Add to Cart
  • PRECISION TRAK AND STOP KIT KREG

    Kreg

    PRECISION TRAK AND STOP KIT KREG

    $163.00
    KREG PRECISON TRAK & STOP KIT Cutting wood with accuracy is an important part of making sure the project turns out just right. The inaccuracy of pencil marks on a board can then be compounded by the need to follow that mark precisely with the saw...
    KMS8000
    $163.00
    Add to Cart
  • TTRACK PLUS 36IN. W/ADJ. LEXAN SCAL INCRA

    Incra

    TTRACK PLUS 36IN. W/ADJ. LEXAN SCAL INCRA

    Now: $19.99
    Was: $20.99
    TTRACKPLUS36 36" T-Track Plus With Adjustable Lexan Scale - Incra Large T-Slot accepts standard 1/4-20 hex bolts and nutsAdjustable Lexanr scaleMount easily with pre-drilled holes and included fastenersHard anodized aluminum for durability
    TTRACKPLUS36
    Now: $19.99
    Was: $20.99
    Add to Cart
  • MITRE GAUGE WITH CLAMP

    MITRE GAUGE WITH CLAMP

    Now: $59.99
    Was: $67.99
    Mitre Gauge with Hold-Down Clamp This mitre gauge is provided with a clamp that holds down the workpeice firmly in place when crosscutting. When you squeeze the pistol grip, a downward pressure is produced on the workpiece to hold it down in place. It...
    B210MIT
    Now: $59.99
    Was: $67.99
    Add to Cart
WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY & SELL DIRECT
Crown Lubricants
DeWalt
Stanley