Milling Accessories

B3087 Coolant Pump System with Magnetic Base The B3087 Coolant Pump System can be used with any metal cutting machine for reduced tool wear, efficient cutting and better finishes. The coolant pump has a maximum capacity of 5 gallons and comes with...

Slitting Saw Arbor Spring loaded mechanism Fits all sizes from 1/2" to 1" bore Shank dia.: 1/2" Step Arbor: ½”, 5/8”, ¾”, 7/8” and 1”

Fly Cutter SetTop QualityCounter balancedMade of hardened steelUses standard tool-bitsShank Dia.: 1/2"Includes Head Dia.: 3/4", 1 1/8", 1 1/2"Standard Tool Bit Size: 3/16", 1/4", 5/16"

This precision tilting machine vise is made from high-quality cast-iron construction. This vise can be tilted and locked in any position from 0° - 90° lending itself to many milling applications. Trust this vise for heavy duty precision milling...

Angle Plate Slotted cast iron Machine finish Size 4 1/2" wide x 3 1/2" x 3"

These black oxide finish Fly Cutter are each supplied with a set screw flat and a blank high-speed steel tool. 3/4", 1-1/8", and 1-3/8" head sizes with 1/2" shanks. 3/16", 1/4", and 5/16" bit sizes. Stand included. Specifications Head sizes: 3/4",...

R8 End Mill Holder Specifications: Hole Diameter: 5/8”Thread: 7/16”-20For single and double end mills

This Drift Key quickly removes taper shank drills or reamers from sleeves or sockets.  For use with MT2 – MT3 Made of top quality hardened steel

T Bolts (Copper Plated Brass) 1/4" - 20 Suitable for T slots in jigs and many fences Bolt head 5/8" x 7/16" x 3/32" thick. Length: 1 3/4" 10 Per Package

T Bolts (Copper plated Brass) 1/4" - 20 Suitable for T slots in jigs and many fences Bolt head 5/8" x 7/16" x 3/32" thick. Length: 2 1/4" 10 Per Package

This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps. Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also includes...

This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps.  Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also...

This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps.  Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also...

End Mill Holder Size 1/2Morse Taper MT3 For Weldon Shank End mills Drawbar Threaded 3/8"-16Precision ground and hardened to 50 RC concentric with .0006" Precision ground and hardened to 50 RC concentric with .0006"

A 1-2-3 block is a layout tool that can be used for both metal and woodworking. As the name suggests, the block's thickness is 1", the width is 2", and the length is 3". A quick and accurate reference to those sizes in a convenient package for all sorts...

4pc Steel Square Set Made by "GROZ" Sizes: 2", 3", 4" & 6" Hardened spring steel fixed to the stock with tapered self-locking rivets Blade and stock precision ground Working edges of the blade are lapped to increased accuracy

Manufactured under carefully controlled conditions allowing for the highest degree of accuracy when used at a temperature of 68 degrees F (20 degree C). All gauge block sets are assigned serial numbers and are accompanied with a certificate of inspection...

End Mills 20pc Set - Metric Excellent performance in hard materials that are difficult to cut. High productivity with long tool life. Sizes in 2 flutes: 20, 16, 14, 12, 10, 8, 6, 5, 4, 3mm In 4 flutes - same as 2 flutes

5C-Spin Index Features And Mechanism: The indexing plate has 36 holes at 10" intervals, so permitting the dividing into 2, 3, 4, 6, 8, 12, 18 or 36 parts. Method Of Using Vernier Holes Example: Index 32o First place in 0o position of front plate and...

6" Rotary Table, Horizontal/Vertical Fine grade cast iron Precision ground hardened worm Ratio: 90:1 360degree graduations Comes with Index Plates and Tail Stock

CXVISE7 This high quality drilling & milling vise is ideal for heavy duty precision applications and features as swivel base, perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. This vise is widely...

CXVISE3 This Accu-lock machine vise is ideal for heavy duty precision milling & drilling applications and features perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. The vise features an angle lock...

CXVISE2 This precision tilting machine vise is made from high quality cast iron construction and features a vise accuracy (parallelism & square) of 0.025mm/100mm. Features a 360° swivel rotating base and can be tilted in any position from 0°...

CXVISE1 This Accu-lock machine vise is ideal for heavy duty precision milling & drilling applications and features as swivel base, perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. This high...

Manufactured from graded cast iron and precision ground, these vises have a needle bearing thrust collar. High end precision lock down vises allow you to turn your best work, with high confidence. Specifications: Jaw Width: 5" (125mm) Jaw Opening: 5"...

Manufactured from graded cast iron and precision ground, these vises have a needle bearing thrust collar. High end precision lock down vises allow you to turn your best work, with high confidence. Specifications: Jaw Width: 4 1/8" (104mm) Jaw Opening: 3...

CX615SR Steady Rest Optional for the CX615 Lathe/Mill Combination.

CX615SB Elevating Block Elevating block for Mill/Drill Model CX615 8" x 6" x 5" high heavy cast iron with two 1/2" T slots and uses the standard 7/16" t-slot nuts. One of the biggest challenges for milling a small flat object is getting the mill close to...

CX615CHUCK CHUCK 3 JAW FOR CX615,B2229 3 Jaw Chuck for CX615 (LATHE/MILL COMBINATION 110V 3/4HP 60HZ) and B2229 (LATHE/MILL COMBINATION 110V 3/4HP 60HZ)

CX615CA Adapter Adapter for the CX615CHUCK

Angle Plate Slotted cast iron Machine finish Dimensions: Side 1, 3 slots, 5.00" x 0.56"Side 2, 2 slots, 4.46" x 0.56"Length is 5.99"

B3499 Turning TPU 3pc Carbide Insert for B2136 End Mill Excellent for facing off excess material quickly, leaving a smooth and even finish

D3729 6-pc T-Slot Cutter This 6-pc. .235" shank set includes: .116" x .589" x 4, .119" x .589" x 6, .196" x .589" x 6, .198" x .790" x 8 (x2) & .122" x .987" x 10 cutting teeth. Wood storage box included. SPECIFICATIONS: .116" x .589" x 4 Cutting...

B2424KIT Clamping Kit for B2424 Rotary Table This clamping kit is consisting of two strap clamps, two step blocks, two 2-1/8" (55mm) long bolts, 12mm square T-nuts and two nuts.

Morse Taper End Mill Holder - Taper: 3, size 3/8" For Weldon Shank End mills Precision ground and hardened to 50 RC concentric with .0006" All morse taper holders are threaded for 3/8" - 16 Drawbar

T747075 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/8"

T747055 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/16"

T747045 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/32"

T747025 2-1/2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2-1/2" Thickness: 1/16"

T747015 2-1/2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2-1/2" Thickness: 1/32"

T747010 2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2" Thickness: 1/8"

T747005 2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2" Thickness: 1/16"

Angle Plate Cast iron Surface ground No slots Heavily reinforced Size: 3" x 3" x 3"

R8 And Morse Taper Sleeves - From MT4 to MT3 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT4 to MT3

R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT4 to MT2

MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...

MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...

R8 And Morse Taper Sleeves - From MT2 to MT1 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT2 to MT1

R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT3 to MT2

H. D. Cross Sliding Table This heavy-duty compound slide table can be used for several applications e.g. positioning, milling, line drilling & optical viewing. Specifications Table surface: 5 1/2" x 12" Table Cross Travel: 5" Table Longitudinal...

Tubing Center This well constructed tubing center is ideal for hollow work pieces like pipes & tubing. With sealed ball bearing you don't have to worry about dust getting in. MT3 Large Diameter: 3" Small Diameter: 3/4"

R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT2

RAPID INDEXER 3 Jaw Chuck 3 3/16" Useful for 2 direction horizontal & vertical milling & drilling operations. It has a 3 jaw chuck fitted on the head for big range clamping. The indexer has a simple rapid operation with dividual number 24 - notch (15...

B2724 Horizontal/Vertical Rotary Table 4” This rotary table is ideal for milling and multi-purpose work and anyone creating smaller precision work. The table features a whole degree scale on the dial, lash adjustment screw, worm gear drive, reference...