Description
CX509N
18" OPEN END DRUM SANDER
We have improved on our original CX509 Drum Sander to bring you the CX509N featuring improved & heavier duty components, mechanics and belt tracking.
At a lower price point that traditional drum sanders, this machine offers excellent value to any small to medium workshop. With a small footprint, large sanding capacity & electronic variable speed, this sander will tackle stock up to 36" wide & 4 ½" thick.
A key feature to this sander is the table moves up and down instead of the head (like most open end sanders on the market). This means sanding operations are more consistent and rigid.
Ideal for flattening and smoothing wide panels as well as reducing thickness without grain tear-out on a wide range of woods. Once this sander is set up in your shop, you will find all kinds of sanding applications that this open end machine can tackle.
In our rigorous testing on this machine and through a few iterations, we have found this machine to be excellent value. Users should pay close attention to the conveyor belt tracking and take the time to set this up correctly upon first use as well as periodically throughout the life of your machine. Follow the steps laid out in the service manual and this machine will provide you with years of service.
Like all CX-Series machines, this unit feature powder coated paint, overall heavy duty construction and a full 3 year warranty.
Features:
Electronic Variable Speed Conveyor
Stationary Drum: table moves up & down, not head
V Belt Drive
Easy change sandpaper
Steel Construction
Specifications:
Motor: 1.5HP, 110V single phase, 11.5A
Electronic Variable Speed Conveyor: 2 - 12 FPM
Drum Surface Speed: 4000 FPM
18" x 44 ½" Abrasive Conveyor Belt
Drum Surface Speed: 4000 FPM
Max Stock Dimensions: 36" W x 4 ½" H
Minimum Board Length: 6"
Minimum Board Thickness: 1/8"
Sanding Drum Size: 4" (uses 3" wide sandpaper)
Dust Collection Port: 4"
Machine Dimensions: 41.5" x 22.5" x 50"
Weight: 93kg
3 Year Warranty
1 Review
-
Nice Power
Good power and adjustability for a single phase sander. Batching out materials is quite easy with the feed belt. Having changed the grit belt yet but set up and use hasn't been a hastle. No reason to run it on a slow feed speed (doesn't really change mhch) and wish the shut off as on the open end (or above the mouth) as I need to reach over the conveyer to turn it off
