Hand Tools

2” Adjustable Handle Size: 1/4” x 20 TPI

2 ¼” Dia. Star Knob ( 1” stud) Size: 5/16” x 18 TPI

2 ¼” Dia. Star Knob ( 1” stud) Size: 3/8” x 16 TPI

2 ¼” Dia. Star Knob ( through hole) Size: 5/16” x 18 TPI

2 ¼” Dia. Star Knob ( through hole) Size: 3/8” x 16 TPI

2 ¼” Dia. Star Knob ( through hole) Size: 1/4” x 20 TPI

2 ½” T-Knob Size: 5/16” x 18 TPI

3” Post Handle Size: 3/8” x 16 TPI.

Brass Sliding Caliper Solid brass 4«" long Dovetail slide calibrated 0-4" and 0-100mm Perfect pocket measuring tool in presentation case

Sharpening Guide 2 in 1 Easy to use on both the grinder and the hone Sharpen hand chisel and plane blades on this guide Scale on guide gives accurate 30 degree setting, guide takes up to 2 5/8" wide blades

Optional sleeve For B1812 "One Way" Chuck 1 1/4" x 8 TPI Made in Canada

Optional sleeve For B1812 "One Way" Chuck 1" x 8 TPI Made in Canada

Jaw For Model B1821 "One Way" 4 Jaw Safety Scroll Chuck #3 Holding Dimensions: External chucking Minimum: 3 1/8" Maximum: 4 1/2" Optional Holding Dimensions: Internal chucking Minimum: 3 3/4" Maximum: 5 1/4" Made in Canada

Jaw For Model B1821 "One Way" 4 Jaw Safety Scroll Chuck #1 Holding Dimensions: External chucking Minimum: 3/8" Maximum: 1 7/8" Optional Holding Dimensions: Internal chucking Minimum: 12" Maximum: 2 1/2" Made in Canada

Jumbo Jaws For Model B1821 "One Way" 4 Jaw Safety Scroll Chuck Holding Dimensions: External chucking Minimum: 2 3/4" Maximum: 11" Optional Holding Dimensions: Internal chucking Minimum: 4 3/4" Maximum: 12" Made in Canada

"One Way" 4 Jaw Safety Scroll Chuck Made in Canada Basic Chuck is complete with #2 jaws, wood screws and wrench Weight: 2 kg Extra Jaws Model Holding Dimensions Minimum Maximum # 1 Jaws B1821J1 (optional) #2 Jaw B1821J2 (Standard) # 3...

Jointer Knives Honing Tool for H.S.S Knives This simple hone tool lets you hone your jointer knives without having to remove them from the machine. Dip the hones in oil and make light, even strokes against the cutter head for perfect edges. The body...

8" Lazy Susan 5/16" Thick Size: 4" Load Capacity: 100kg

Combination Mallet Chrome plated steel tubular handle with rubber grip Head with plastic and rubber tips

American Pattern File Type: 8" Handy File This file is made from the finest grade steel and is specially finished by a method designed to improve its cutting efficiency and lengthen its effective life. Picture Differs Slightly

6" Dial Caliper 4-way measurement, outside, inside, depth and step measurement Large dial means wide graduation spacing for clear, fast and accurate reading Dial is adjustable for setting to make relative measurement Scale surface is satin-chrome...

Needle File Set - 5pc. 5 1/2" Long Various Shapes Easy Cutting

Drill Chuck Keyed Chuck Return the accuracy to your Drill Press| Size: 1/8" - 5/8" Taper: JT3

B045 Drill Chuck Keyed Chuck Return the accuracy to your Drill Press Size: 1/2" Taper: JT6

Lathe Chucks - 8" - 20kg. These chucks are suitable for toolrooms and production work. The chuck bodies are made of steel and the scroll plates are made of high quality heat-treated carbon steel. These chucks are of plain back design and may be fitted to...

Lathe Chucks - 4" - 3.8kg. These chucks are suitable for toolrooms and production work. The chuck bodies are made of steel and the scroll plates are made of high quality heat-treated carbon steel. These chucks are of plain back design and may be fitted...

Lathe Chucks - 6" - 9.5kg. These chucks are suitable for toolrooms and production work. The chuck bodies are made of steel and the scroll plates are made of high quality heat-treated carbon steel. These chucks are of plain back design and may be fitted...

4 Jaw Independent Lathe Chucks - 6" High Quality Hardened And Ground Reversible Jaws|| Proven by years of hard use in the industry Each chuck comes complete with mounting bolts (where needed) and large chuck key.

Shockless Hammer - 2lb. With cast urethane head and tubular steel handle with nonslip rubber grip. Does not bounce.