null

Woodworking

Woodworking

  • DEWALT PORTABLE TABLE SAW 10IN. W/STAND
    Add to Cart

    DeWalt

    DEWALT PORTABLE TABLE SAW 10IN. W/STAND

    CAD $919.00
    DWE7491RS 10" Jobsite Table with Rolling Stand - DEWALT The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free...
    DWE7491RS
    CAD $919.00
    Add to Cart
  • DRILL BIT SET METRIC MILESCRAFT 7PC.
    Add to Cart

    DRILL BIT SET METRIC MILESCRAFT 7PC.

    CAD $21.99
    2318 7pc Metric Brad Point Bit Set - Miles Craft Brad Point Tips Ensure Pin Point Accuracy Roll-Forged Flutes and Diamond Ground Tips for Sharper, Longer Life For use with soft, hard, exotic, veneered and laminated wood. Set Includes: 4mm Drill...
    2318
    CAD $21.99
    Add to Cart
  • BLADE 89 3/4IN. X 1/2
    Add to Cart

    Wood Miller

    BLADE 89 3/4IN. X 1/2

    CAD $34.99
    CX115012 89-3/4" x 1/2" Band Saw Blade for CX115 Band Saw Specifications: Blade Length: 89-3/4" Blade Width: 1/2" TPI: 6 Blade Type: Hook
    CX115012
    CAD $34.99
    Add to Cart
  • SANDING DRUM SET 16 PC
    Add to Cart

    ROK

    SANDING DRUM SET 16 PC

    Now: CAD $12.99
    Was: $18.99
    B3393 16pc 2" Sanding Drum Set Rubber drum size: 1/2" x 2", 3/4" x 2", 1" x 2", 1-1/2" x 2" 1 each Fine, Medium and Coarse for each size drum sanding sleeve
    B3393
    Now: CAD $12.99
    Was: $18.99
    Add to Cart
  • SPRING DIVIDER 6IN. 3 PC SET
    Add to Cart

    ROK

    SPRING DIVIDER 6IN. 3 PC SET

    CAD $14.99
    B3385 3 Piece, 6" Caliper and Divider Set Includes divider and both inside and outside calipers Carbon steel with hardened fulcrum spring and points 3 Piece Set
    B3385
    CAD $14.99
    Add to Cart
  • WOODWORKING TABLE VISE ECONOMY B3345
    Add to Cart

    WOODWORKING TABLE VISE ECONOMY B3345

    CAD $39.99
    B3345 Woodworking Table Vise Durable cast iron Ideal for beginners or hobbyists Jaws are 6" x 2" 4-3/8" Jaw opening Pre-drill holes allows you to permanently mount it to a bench e-drill holes allows you to permanently mount it to a bench  
    B3345
    CAD $39.99
    Add to Cart
  • PRECISION 3 WAY DRILL PRESS VISE 5IN.
    Add to Cart

    PRECISION 3 WAY DRILL PRESS VISE 5IN.

    Now: CAD $109.00
    Was: $119.00
    B3319 5" Precision 3 Way Drill Press Vise Graded cast iron construction Prismatic fixed jaw for holding round material Stepped jaws for holding thin material Precision ground right angle faces for horizontal and vertical positioning Can be mounted...
    B3319
    Now: CAD $109.00
    Was: $119.00
    Add to Cart
  • PRECISION 3 WAY DRILL PRESS VISE 4IN.

    PRECISION 3 WAY DRILL PRESS VISE 4IN.

    Now: CAD $89.00
    Was: $95.00
    B3318 Precision 3 Way Drill Vise Uni-Grip Manufactured from graded cast iron. This vise has side faces which are fully ground allowing right angle positioning in 3 directions horizontal, vertical and straight. The most versatile vise made for a pillar...
    B3318
    Now: CAD $89.00
    Was: $95.00
  • BED EXTENTION FOR MINI WOODLATHE CX 813
    Add to Cart

    Craftex CX Series

    BED EXTENTION FOR MINI WOODLATHE CX 813

    CAD $109.00
    CX813EXT 22" Bed Extension for CX813 - Craftex CX-Series Bed Extension for CX813 Mini Wood Lathe The CX813 can be extended another 22" by installing this bed extension
    CX813EXT
    CAD $109.00
    Add to Cart
  • PRICK PUNCH 3/8IN.
    Pre-Order Now

    Groz

    PRICK PUNCH 3/8IN.

    CAD $11.99
    PKPHD 3/8" Prick Punch - GROZ Prick Punches are used for marking metals in work layouts. This punch has a very sharp point (60° included angle), hence is highly suitable where very precise marking / scorring is required. It has a single piece...
    PKPHD
    CAD $11.99
    Pre-Order Now
  • BLADE 89 3/4IN. X 1/4
    Add to Cart

    Wood Miller

    BLADE 89 3/4IN. X 1/4

    CAD $27.99
    CX115014 89-3/4" x 1/4" Band Saw Blade for CX115 Band Saw Specifications: Blade Length: 89-3/4" Blade Width: 1/4" TPI: 6 Blade Type: Hook
    CX115014
    CAD $27.99
    Add to Cart
  • BLADE BI METAL 89 3/4 X 1/2IN. WOOD
    Add to Cart

    Wood Miller

    BLADE BI METAL 89 3/4 X 1/2IN. WOOD

    CAD $99.99
    CX115012BMB 89-3/4" x 1/2" Bi-Metal Band Saw Blade for CX115 Band Saw. Specifications: Blade Length: 89-3/4" Length Blade Width: 1/2" Width TPI: 14 Blade Type: Raker
    CX115012BMB
    CAD $99.99
    Add to Cart
  • 12IN. METAL WOOD BANDSAW CRAFTEX CX SERIES CX115
    Add to Cart

    Craftex CX Series

    12IN. METAL WOOD BANDSAW CRAFTEX CX SERIES CX115

    Now: CAD $1,999.00
    Was: $2,199.00
    CX115 12" Wood and Metal Cutting Band Saw - Craftex CX-Series This 12" band saw is designed to cut ferrous and non-ferrous metals and also hard and soft woods. The CX115 features a solid one piece welded steel body construction which allows the machine...
    CX115
    Now: CAD $1,999.00
    Was: $2,199.00
    Add to Cart
  • BLADE 56 1/2IN. X 1/2IN. 14TPI
    Add to Cart

    Raptor Cutting Tools Inc.

    BLADE 56 1/2IN. X 1/2IN. 14TPI

    CAD $23.99
    ÿþCX112012 56-1/2" x 1/2" x 14 TPI Band Saw Blade for CX112 Blade for CX112 Portable Band Saw
    CX112012
    CAD $23.99
    Add to Cart
  • LONG SAFETY PUSH STICK
    Add to Cart

    LONG SAFETY PUSH STICK

    CAD $9.99
    B3261 Large Safety Push Stick This strong rigid push stick is suitable for use with many machines, keeping your  hand safely away from the cutting tools. Made from solid plastic, with convenient hanger.
    B3261
    CAD $9.99
    Add to Cart
  • HEAVY DUTY AIR FILTER WITH LED CSA

    Craftex CX Series

    HEAVY DUTY AIR FILTER WITH LED CSA CX408

    Now: CAD $679.00
    Was: $849.00
    CX408 Heavy Duty Air Cleaner with LED Filter Change Light - Craftex CX-Series This air cleaner not only keep your air crisp and clean, but it will also tell you when it's time to change the filter with the all new LED light indication system, a first...
    CX408
    Now: CAD $679.00
    Was: $849.00
  • PLANER 13IN. WITH FOLDING TABLE AND BLADE
    Add to Cart

    DeWalt

    PLANER 13IN. WITH FOLDING TABLE AND BLADE

    Now: CAD $799.00
    Was: $949.00
    DW735XCAN  13" Dual Speed Planer with Infeed & Outfeed Tables and Three Extra Knives - DEWALT Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease Three knife cutter-head...
    DW735XCAN
    Now: CAD $799.00
    Was: $949.00
    Add to Cart
  • DISC SANDER 12IN. CX SERIES CSA CX506
    Add to Cart

    Craftex CX Series

    DISC SANDER 12IN. CX SERIES CSA CX506

    Now: CAD $285.00
    Was: $299.00
    CX506 12" Disc Sander - Craftex CX-Series Powered by a 1.2 HP motor this 12" disc sander operates at a speed of 1750 RPM and is designed for accuracy and efficiency. The 16-3/8" x 6-7/8" table provides a solid work surface, tilts between 0° -...
    CX506
    Now: CAD $285.00
    Was: $299.00
    Add to Cart
  • SANDER 1IN. X30IN. BELT AND 5IN. DISC CSA
    Add to Cart

    Craftex

    SANDER 1IN. X30IN. BELT AND 5IN. DISC CSA CT170N

    Now: CAD $149.00
    Was: $169.00
    CT170N 1" x 30" Belt and 5" Disc Sander - CRAFTEX The CT170N is equipped with a powerful 1/3-HP, 120-Volt motor which spins the 5” sanding disc and the 1” x 30” sanding belt for fast stock removal. This combination belt/disc sander...
    CT170N
    Now: CAD $149.00
    Was: $169.00
    Add to Cart
  • SELF LEVELLING LINE LASER DEWALT
    Add to Cart

    SELF LEVELLING LINE LASER DEWALT

    Now: CAD $149.00
    Was: $168.00
    DW088K Self Levelling Cross Line Laser - DEWALT Projects bright crossing horizontal and vertical lines for various levelling and layout applications Maintains full brightness for visibility and extends range Power Supply: 3 AAA...
    DW088K
    Now: CAD $149.00
    Was: $168.00
    Add to Cart
  • DRILL BLOCK IMPERIAL MILESCRAFT
    Add to Cart

    Milescraft

    DRILL BLOCK IMPERIAL MILESCRAFT

    CAD $10.99
    1312 Drill Block - MILESCRAFT DrillBlock ™ allows you to drill straight holes every time. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. The inserted solid metal guide offers the six common drill...
    1312
    CAD $10.99
    Add to Cart
  • OUTBOARD EXTENSION FOR CX802
    Pre-Order Now

    Craftex CX Series

    OUTBOARD EXTENSION FOR CX802

    CAD $199.00
    CX802EXTOutboard Extension for CX802 Wood LatheThis outboard extension can be installed on the cast iron stand of your CX802 wood lathe and used to turn bowls approximately 30".Includes Bed Extension, Banjo, Post, and mounting hardware.
    CX802EXT
    CAD $199.00
    Pre-Order Now
  • BEVEL GUIDE SET FOR SP6000X1 1966647
    Add to Cart

    Makita

    BEVEL GUIDE SET FOR SP6000X1 1966647

    CAD $42.99
    1966647 Miter Guide Set for SP6000J/J1 Guide Rail - MAKITA Durable construction for longer life Engineered for easy miter angle set up Ideal for cutting angled panels for custom cabinets, book cases, and more Use with SP6000J/J1 plunge circular saw,...
    1966647
    CAD $42.99
    Add to Cart
  • WOOD LATHE WITH DIGITAL READOUT CSA
    Add to Cart

    Craftex CX Series

    WOOD LATHE WITH DIGITAL READOUT CSA CX803

    Now: CAD $1,049.00
    Was: $1,199.00
    CX803 14" x 43", 3/4HP Wood Lathe - Craftex CX-Series Equipped with a 3/4 HP motor, this 14" x 43" wood lathe can swing 14" over bed and features variable spindle speed ranges from 600 to 2400 RPM. The 43" distance between the centers and the...
    CX803
    Now: CAD $1,049.00
    Was: $1,199.00
    Add to Cart
  • ABRASIVE KIT MEDIUM GRIT P220 6 BELTS
    Add to Cart

    WorkSharp

    ABRASIVE KIT MEDIUM GRIT P220 6 BELTS

    CAD $18.99
    WSSA0002704C 6 Belt Medium Grit P220 Abrasive Kit For Knife Sharpening - WORKSHARP Contains 6 P220 abrasive belts for the WSKTS. Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life utility applications.
    WSSA0002704C
    CAD $18.99
    Add to Cart
  • DISC SANDING 100/PK 150G 8H 5IN. H AND L
    Add to Cart

    Klingspor

    SANDING DISC 100/PK 150G 8H 5IN. H AND L

    CAD $59.99
    150760 5" 150-Grit Hook & Loop Disc Sander - 100/pk - KLINGSPOR High-quality abrasive paper, especially for suited for paint, varnish and fill Diameter: 5" Bonding Agent: Resin Grain: Aluminum Oxide Coating: Semi-Open Qty: 100 Discs Grit: 150
    150760
    CAD $59.99
    Add to Cart
  • DISC SANDING 100/PK 220G 8H 5IN. H AND L
    Add to Cart

    Klingspor

    SANDING DISC 100/PK 220G 8H 5IN. H AND L

    CAD $59.99
    150259 5" 220-Grit Hook & Loop Disc Sander - 100/pk - KLINGSPOR High-quality abrasive paper, especially for suited for paint, varnish and fill Diameter: 5" Bonding Agent: Resin Grain: Aluminum Oxide Coating: Semi-Open Qty: 100 Discs Grit: 220
    150259
    CAD $59.99
    Add to Cart
  • DISC SANDING 100/PK 100G 8H 5IN. H AND L
    Add to Cart

    Klingspor

    SANDING DISC 100/PK 100G 8H 5IN. H AND L

    CAD $59.99
    147977 5" 100-Grit Hook & Loop Disc Sander - 100/pk - KLINGSPOR High-quality abrasive paper, especially for suited for paint, varnish and fill Diameter: 5" Grain: Aluminum Oxide Coating: Semi-Open Qty: 100 Discs Grit: 100
    147977
    CAD $59.99
    Add to Cart
  • DISC SANDING 100/PK 180G 8H 5IN. H AND L
    Add to Cart

    Klingspor

    SANDING DISC 100/PK 180G 8H 5IN. H AND L

    CAD $59.99
    147837 5" 180-Grit Hook & Loop Disc Sander - 100/pk - KLINGSPOR High-quality abrasive paper, especially for suited for paint, varnish and fill Diameter: 5" Grain: Aluminum Oxide Coating: Semi-Open Qty: 100 Discs Grit: 180
    147837
    CAD $59.99
    Add to Cart
  • DISC SANDING 100/PK 80G 8H 5IN. H AND L
    Add to Cart

    Klingspor

    SANDING DISC 100/PK 80G 8H 5IN. H AND L

    CAD $59.99
    147643 5" 180-Grit Hook & Loop Disc Sander - 100/pk - KLINGSPOR High-quality abrasive paper, especially for suited for paint, varnish and fill Diameter: 5" Grain: Aluminum Oxide Coating: Semi-Open Qty: 100 Discs Grit: 80
    147643
    CAD $59.99
    Add to Cart
  • DISC SANDING 100/PK 120G 8H 5IN. H AND L
    Add to Cart

    Klingspor

    SANDING DISC 100/PK 120G 8H 5IN. H AND L

    CAD $59.99
    147170 5" 120-Grit Hook & Loop Disc Sander - 100/pk - KLINGSPOR High-quality abrasive paper, especially for suited for paint, varnish and fill Diameter: 5" Grain: Aluminum Oxide Coating: Semi-Open Qty: 100 Discs Grit: 120
    147170
    CAD $59.99
    Add to Cart
  • MOBILE BASE UNIVERSAL 450LBS CRAFTEX CT183
    Pre-Order Now

    Craftex

    MOBILE BASE UNIVERSAL 450LBS CRAFTEX CT183

    CAD $79.99
    CT183 Universal Mobile Base with 450 lbs Load Capacity - CRAFTEX High quality and very versatile, this mobile base is the perfect addition to your workshop. This mobile base can be adjusted to form: Maximum Square: 34" x 34" Maximum Rectangle: 18" x...
    CT183
    CAD $79.99
    Pre-Order Now
  • SQUARE DRIVER 3IN. AND 6IN. NO. 2 COMBO KREG
    Add to Cart

    Kreg

    SQUARE DRIVER 3IN. AND 6IN. NO. 2 COMBO KREG DDS

    CAD $6.49
    DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems - KREG 3-Inch and 6-Inch Driver Set gives you choices. The Deep 2 Driver recess resists cam-out and comes in the 3-inch and 6-inch length set. The 3-inch...
    DDS
    CAD $6.49
    Add to Cart
  • 12IN. COLD SAW BLADE FOR CX110

    Craftex CX Series

    12IN. COLD SAW BLADE FOR CX110 CX110B

    CAD $399.00
    CX110B 12" slow speed cold cut saw blade for CX110 This slow speed cold saw blade is a high end Italian made blade designed for the CX110. Size – 12” Teeth – 180 Made in Italy
    CX110B
    CAD $399.00
  • 12IN. SLOW SPEED COLD SAW WITH STAND CX110
    Add to Cart

    Craftex CX Series

    12IN. SLOW SPEED COLD SAW WITH STAND CX110

    Now: CAD $3,299.00
    Was: $3,799.00
    CX110 12" slow speed cold cut saw with stand Craftex CX Series This slow speed cold saw is an extremely well built machine with the ability, power and precision to cut through just about anything! With a slow speed of only 52 RPM, this machine cuts...
    CX110
    Now: CAD $3,299.00
    Was: $3,799.00
    Add to Cart
  • DIAL BORE GAUGE 2 6IN.
    Pre-Order Now

    Igaging

    DIAL BORE GAUGE 2 6IN.

    CAD $109.00
    B3149 2" to 6" Dial Bore Gauge - iGaging This is a precision dial bore gauge set from iGaging for precise measurement of cylinder bores, main caps, and connecting rods. Easy to Use and Read Super Precision Deep Bore Gauge Extension Holder Measures...
    B3149
    CAD $109.00
    Pre-Order Now
  • WOOD LATHE 18IN. X 47IN. HEAVY DUTY CSA CX802
    Add to Cart

    Craftex CX Series

    WOOD LATHE 18IN. X 47IN. HEAVY DUTY CSA CX802

    Now: CAD $2,999.00
    Was: $3,399.00
    CX802 This CX Series lathe has all the features any serious turner would be looking for. This model is an improved version of our CT128N, where we have changed from a (brushless) DC motor to a heavy duty 3-phase AC motor. The machine now features...
    CX802
    Now: CAD $2,999.00
    Was: $3,399.00
    Add to Cart
  • PUSH PAD EXTRA LONG
    Add to Cart

    PUSH PAD EXTRA LONG

    CAD $14.99
    B3104 Extra Long Safety Push Pad Made of strong ABS plastic this push pad is 16" long and 2-3/4" wide and is designed for comfort and control. The push pad has a sticky pad for strong hold. A great safety measure.
    B3104
    CAD $14.99
    Add to Cart
  • DISC VELCRO 9IN. 60G SIA
    Add to Cart

    Sia Abrasvies

    DISC VELCRO 9IN. 60G SIA

    Now: CAD $9.99
    Was: $10.99
    SD1919960 Sia Sanding Disc with Velcro Backing  These high quality sanding discs from SIA Abrasives feature a strong Velcro backing.  Ideal for easy changing of sanding grits with minimal effort.  Size: 9"  Grit: 60
    SD1919960
    Now: CAD $9.99
    Was: $10.99
    Add to Cart
  • 3 IN 1 SHOULDER PLANE 6 1/8IN.
    Add to Cart

    Groz

    3 IN 1 SHOULDER PLANE 6 1/8IN.

    CAD $109.00
    B3112 3 in 1 Shoulder Plane Featuring a cast iron body with ground flat sole, this plane is designed to perform the functions of three; a bullnose plane for working on flush corners, a conventional rabbet plane and a chisel plane for working right up...
    B3112
    CAD $109.00
    Add to Cart
  • PLANE SHOULDER 5 3/16IN.
    Add to Cart

    PLANE SHOULDER 5 3/16IN.

    CAD $85.00
    B3111 5-3/16" Shoulder Plane This shoulder plane features 5-3/16" long sole and a 3/4" wide sharp steel blade ensuring perfectly smooth surface. The adjustable throat opening is for very fine or coarse work and the top part can be removed for changing...
    B3111
    CAD $85.00
    Add to Cart
  • VISE PRECISION TILTING AND SWIVELING
    Add to Cart

    VISE PRECISION TILTING AND SWIVELING

    CAD $189.00
    B3108 Precision Tilting and Swivelling Machine Vise This precision machine vise is manufactured from close grained high tensile seasoned cast iron. The angular slide allows tilting that can be set to any desired angle 45-degree on either side. The...
    B3108
    CAD $189.00
    Add to Cart
  • PIN VISE CAPACITY 0.030 0.062
    Add to Cart

    PIN VISE CAPACITY 0.030 0.062

    CAD $4.99
    B3100 Pin Vise This pin vise features hardened and tempered jaws with knurled handle and holds small delicate tools, parts, screws, wires and spindles. Capacity: 0.030 0.062
    B3100
    CAD $4.99
    Add to Cart
  • DIGITAL LEVEL AND BEVEL GAUGE IGAGING

    DIGITAL LEVEL AND BEVEL GAUGE IGAGING

    CAD $47.99
    B3130 Digital Level & Bevel Gauge - Igaging 3-Side Magnets, 4-Side Measuring Digital Level & Bevel Gauge 2-in-1 Heavy duty aluminum alloy body Tracing absolute level Measuring relative bevel Strong magnets on the bottom and 2 sides Large clear...
    B3130
    CAD $47.99
  • DRUM SANDER 26IN. CRAFTEX CX SERIES CSA
    Add to Cart

    Craftex CX Series

    DRUM SANDER 26IN. CRAFTEX CX SERIES CSA CX504

    Now: CAD $3,999.00
    Was: $4,399.00
    CX504 26" Drum Sander - Craftex CX-Series The CX504 features a high output 3HP motor which turns the two 6" drums at a speed of 1600 RPM for an excellent result. This sander can take work-pieces up to 26" wide and 12" thick and is equipped with a heavy...
    CX504
    Now: CAD $3,999.00
    Was: $4,399.00
    Add to Cart
  • EDGE SANDER OSCILLATING 6IN. X 89IN. CSA 220V CX505
    Add to Cart

    Craftex CX Series

    EDGE SANDER OSCILLATING 6IN. X 89IN. CSA 220V CX505

    Now: CAD $1,699.00
    Was: $2,299.00
    CX505 6" x 89" Oscillating Edge Belt Sander - Craftex CX-Series This oscillating edge belt sander will make a fantastic addition to your shop. Featuring a powerful 1 1/2HP, this production sander has an auxiliary table, used when sanding round or...
    CX505
    Now: CAD $1,699.00
    Was: $2,299.00
    Add to Cart
  • DOVETAIL JIG 12IN. CRAFTEX WITH HEIGHT ADJ
    Pre-Order Now

    DOVETAIL JIG 12IN. CRAFTEX WITH HEIGHT ADJ CT052N

    CAD $155.00
    CT052N 12" Deluxe Dovetail Jig - CRAFTEX The New and Improved Independent Template Height Adjustment feature on CT052N allows the user to adjust the template to the desired height independent of the fence. The CT052N features a solid and durable...
    CT052N
    CAD $155.00
    Pre-Order Now
  • HEIGHT GAUGE MINI WIXEY DIGITAL
    Add to Cart

    Wixey Digital

    HEIGHT GAUGE MINI WIXEY DIGITAL

    CAD $37.99
    WR25 Height Gauge Mini WIXEY The large easy to read display reads in inches with fractions or millimetres. The fractions are displayed using "Precise Fraction Technology" which gives you 4 times the accuracy of other fraction readouts. The decimal...
    WR25
    CAD $37.99
    Add to Cart
  • SANDER 5IN. RANDOM ORBITAL MAKITA
    Add to Cart

    Makita

    SANDER 5IN. RANDOM ORBITAL MAKITA

    CAD $109.00
    BO5030   5" Random Orbit Sander - MAKITA   Large 1/8" random orbit action for fast and super smooth sanding Pad control system for controlled pad speed upon start-up Efficient through-the-pad dust collection system for a cleaner work...
    BO5030
    CAD $109.00
    Add to Cart
  • BASE PLATE/BUSHING SET
    Add to Cart

    Milescraft

    BASE PLATE/BUSHING SET

    CAD $27.99
    1201 Baseplate/Bushing Set - MilesCraft Forget fumbling with tiny bolts and screwdrivers. The TurnLock™ concept turns changing guide bushings, and installing router attachments, into a simple matter of a 1/4 twist.  Just align the TurnLock™ bushing...
    1201
    CAD $27.99
    Add to Cart
  • BLADE 101IN. X 3/16IN. X .025 X 10 RAKER
    Add to Cart

    Raptor Cutting Tools Inc.

    BLADE 101IN. X 3/16IN. X .025 X 10 RAKER

    CAD $55.99
    ÿþCX10431610 101" x 3/16" x 0.025" x 10 TPI Raker Tooth Blade for CX104 Length: 101" Width: 3/16" Thickness: 0.025" TPI: 10
    CX10431610
    CAD $55.99
    Add to Cart
  • BLADE 101IN. X 3/8IN. X .025 X 4 SKIP
    Add to Cart

    Raptor Cutting Tools Inc.

    BLADE 101IN. X 3/8IN. X .025 X 4 SKIP

    CAD $34.99
    ÿþCX104038SKT 101" x 3/8" x 0.025" x 4 TPI Skip Tooth Blade for CX104 Length: 101" Width: 3/8" Thickness: 0.025" TPI: 4
    CX104038SKT
    CAD $34.99
    Add to Cart
  • BLADE 101IN. X 3/4IN. X .032 X 3TPI
    Add to Cart

    Raptor Cutting Tools Inc.

    BLADE 101IN. X 3/4IN. X .032 X 3TPI

    CAD $39.99
    ÿþCX104034 101" x 3/4" x 0.032" x 3 TPI Blade for CX104 Length: 101" Width: 3/4" Thickness: 0.032" TPI: 3
    CX104034
    CAD $39.99
    Add to Cart
  • BLADE 101IN. X 1/2IN. X .025 X 4 SKIP
    Add to Cart

    Raptor Cutting Tools Inc.

    BLADE 101IN. X 1/2IN. X .025 X 4 SKIP

    CAD $34.99
    ÿþCX104012SKT 101" x 1/2" x 0.025" x 4 TPI Skip Tooth Blade for CX104 Length: 101" Width: 1/2" Thickness: 0.025" TPI: 4
    CX104012SKT
    CAD $34.99
    Add to Cart
  • BELT 2 X 28 GR080
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR080

    CAD $7.99
    CT16980 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 80
    CT16980
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR060
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR060

    CAD $7.99
    CT16960 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 60
    CT16960
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR040
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR040

    CAD $7.99
    CT16940 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 40
    CT16940
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR220
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR220

    CAD $7.99
    CT169220 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 220
    CT169220
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR180
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR180

    CAD $7.99
    CT169180 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 180
    CT169180
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR120
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR120

    CAD $7.99
    CT169120 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 120
    CT169120
    CAD $7.99
    Add to Cart
  • BELT 2 X 28 GR100
    Add to Cart

    Primex Abrasives

    BELT 2 X 28 GR100

    CAD $7.99
    CT169100 2" x 28" Belt for CT169N Sander 2" Width x 28" Length Grit: 100
    CT169100
    CAD $7.99
    Add to Cart
  • POWER FEEDER FOR MILLING MACHINES
    Add to Cart

    POWER FEEDER FOR MILLING MACHINES AL500PX

    CAD $679.00
    AL500PX Power Feeder for Milling Machine - ALIGNFor 2V, 3V and 5V milling machine of table feedHighest quality design and construction material.Strengthened "ZYLTEL GEAR"Safe design operation stable low noise.Long life span designed...
    AL500PX
    CAD $679.00
    Add to Cart
  • BLADE SET W/CASE JIGSAW 10PC COBALTSTEEL
    Add to Cart

    DeWalt

    BLADE SET W/CASE JIGSAW 10PC DEWALT

    Now: CAD $24.99
    Was: $26.00
    DW3744C While Quantities last. 10-piece Jig Saw Blade Set with case (U shank) - DeWalt Dewalt DW3744C 10 Pc U-Shank Jig Saw Blade Set with Case comes with three different sets of blades. The 6, 10 and 12-tooth per inch blades are made with HCS material...
    DW3744C
    Now: CAD $24.99
    Was: $26.00
    Add to Cart
  • MORTISING MACHINE WITH TILTING HEAD CSA
    Add to Cart

    Craftex CX Series

    MORTISING MACHINE WITH TILTING HEAD CSA CX302

    Now: CAD $749.00
    Was: $849.00
    CX302 Mortising Machine with Tilting Head This heavy duty tilting head Mortiser features cast iron construction, a powerful 3/4HP motor, left/right tilting head for angled mortising & a solid quick release vise. Other features on this unit include...
    CX302
    Now: CAD $749.00
    Was: $849.00
    Add to Cart
  • STAND FOR MORTISING MACHINE CX302
    Add to Cart

    Craftex CX Series

    STAND FOR MORTISING MACHINE CX302 CX302ST

    CAD $159.00
    CX302ST Steel Stand for CX302 Mortising Machine This heavy duty steel stand is designed for use with the CX302 Tilting Head Mortiser. Features strong steel construction & powder coated CX Series paint to match your sharp looking Mortiser...
    CX302ST
    CAD $159.00
    Add to Cart
  • BAND SAW 14IN. DELUXE CRAFTEX CX SERIES CSA
    Add to Cart

    Craftex CX Series

    BAND SAW 14IN. DELUXE CRAFTEX CX SERIES CSA CX104

    Now: CAD $1,199.00
    Was: $1,699.00
    CX104 14" 1HP Wood Band Saw - Craftex CX-Series The CX104 is loaded with features from top to bottom! This band saw is equipped with a solid one piece upper frame steel body, a powerful 1HP motor and features a 14" x 18" work table. With resaw...
    CX104
    Now: CAD $1,199.00
    Was: $1,699.00
    Add to Cart
  • POWER FEEDER 1/4HP 4 SPEEDS CRAFTEX CSA
    Pre-Order Now

    Craftex CX Series

    POWER FEEDER 1/4HP 4 SPEEDS CRAFTEX CSA CXP02

    Now: CAD $1,149.00
    Was: $1,299.00
    CXP02 1/4-HP Four Speed Power Feeder – Craftex CX-Series The CXP02 features a 1/4-HP, 110-Volt motor and three synthetic rubber feed rollers that eliminate the chore of feeding stock by hand and increases shop production. This power feeder has four...
    CXP02
    Now: CAD $1,149.00
    Was: $1,299.00
    Pre-Order Now
  • POWER FEEDER 1/8HP VARIABLE SPEED CSA CXP01
    Pre-Order Now

    Craftex CX Series

    POWER FEEDER 1/8HP VARIABLE SPEED CSA CXP01

    Now: CAD $749.00
    Was: $799.00
    CXP01 1/8-HP Variable Speed Power Feeder – Craftex CX-Series Increase your shop production with this Variable Speed Power Feeder. The CXP01 is designed with a 1/8-HP, 110-Volt motor providing a feed rate of 6-1/2 to 39 feet per minute for...
    CXP01
    Now: CAD $749.00
    Was: $799.00
    Pre-Order Now
  • SANDING BELT 6 X 48 220G
    Add to Cart

    Klingspor

    SANDING BELT 6 X 48 220G

    Now: CAD $12.99
    Was: $14.50
    B357220 6" x 48" Aluminum Oxide Abrasive Belt  Replacement belt for the B318N, B023N & B2193 Grit: 220
    B357220
    Now: CAD $12.99
    Was: $14.50
    Add to Cart
  • BLADE 133IN. X 1/2IN. X 0.025 14TPI BI METAL
    Add to Cart

    Raptor Cutting Tools Inc.

    BLADE 133IN. X 1/2IN. X 0.025 14TPI BI METAL

    CAD $116.99
    CX101012MB 133" x 1/2" 0.025 14TPI Bi-Metal Band Saw Blade Bi-Metal Blade for Band Saw 133" Length x 1/2" Width 14 Teeth Per Inch
    CX101012MB
    CAD $116.99
    Add to Cart

Busy Bee Tools has the woodworking machines and tools that every serious woodworker is after. With a wide selection of band saws, table saws, planers, jointers, sanders, shapers, router tables, wood lathes and more, you can count on Busy Bee Tools for your woodworking needs. Our two in house brands, Craftex and Craftex CX-Series feature two and three year warranties respectively and these in house brands are bought and sold directly to the end user, avoiding middleman markups and saving you money. For the serious woodworker, Busy Bee Tools is the number one choice.

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley