Outlet Store

5000-pk 44mm Staples for CT150 Flooring Stapler These 44mm staples provide excellent holding power. There are 5000 staples inside a box. Size: 44mm

5000-pk 32mm Staples for CT150 Flooring Stapler These 32mm staples provide excellent holding power. There are 5000 staples inside a box. Size: 32mm

5000-pk 25mm Staples for CT150 Flooring Stapler These 25mm staples provide excellent holding power. There are 5000 staples inside a box. Size: 25mm

4" Bench Top Edge Sander A direct drive motor gives power to a 4" belt sander, which may be used vertically as an edge sander or flat as a standard belt sander. An auxiliary table allows the end of the belt to be used as a contour sander. A 2.5" dust...

Extra Top Dust Bag 19" x 35" for B404 and B405

This Drift Key quickly removes taper shank drills or reamers from sleeves or sockets.  For use with MT2 – MT3 Made of top quality hardened steel

2mm Torx Screw Black Oxide Torx Screws used for high security applications. Size: 2mm

1 1/8” Knob Wing (Female) Size: 1/4” x 20 TPI

Router Table With Fence This router table can handle it all. The table measures 27" x 23 1/2" x 1 3/8" and comes with a 3/4" mitre track and fence track already installed. There is a custom fit table insert 12" x 9" x 3/8" with removable insert rings so...

Rubber pad for B2539 Drill Press Hold Down This rubber pad replaces the standard pad for the Quick Set Drill Press Hold-Down and provides more surface to hold the work-piece. The pad features V-grooves for holding round stock. Size: 1-5/8" x 2-3/8"

Router Table Insert 3/8” phenolic plate with inserts for 1 1/4”, 2 5/8”, and 3 7/8” openings. Size 9” x 12”

Pocket Hole High Speed Steel Drill For pocket hole guides Drill both holes at once 3/8" pocket hole and 1/8" pilot hole 6" overall length (90 degrees for pan-head screws)

4" Angle Vise The H.D vise features dovetailed ways to make the vise sturdy and consistent in locating angles from 0 to 90 degree. The jaws are 1 1/2" deep and are designed to hold round stock as well. Weight: 6.3 kg

Vernier Caliper - 8" Made of tool steel throughout, for outside, inside and depth measurements Satin chrome finish prevent rust and wear Raised sliding surfaces prevent defacement and wear of graduations: clear black engravings Hardened measuring...