null

Milling

Milling

  • KNEE MILL VERTICAL CRAFTEX CX SERIES

    Craftex CX Series

    KNEE MILL VERTICAL CRAFTEX CX SERIES CX603

    Now: CAD $7,699.00
    Was: $7,999.00
    CX603 1-1/2 HP Knee Milling Machine - Craftex CX-Series This heavy duty knee mill has the power and space to make quick and accurate work of just about any machining job you can throw at it. Equipped with a 1-1/2 HP motor, a 8" x 30" work table and...
    CX603
    Now: CAD $7,699.00
    Was: $7,999.00
    Add to Cart
  • MILLING MACHINE WITH DIGITAL READOUT

    Craftex CX Series

    MILLING MACHINE WITH DIGITAL READOUT CX601

    Now: CAD $3,599.00
    Was: $3,999.00
    CX601 Mill / Drill with Digital Readout - Craftex CX-Series Having most of the features found on larger machines, the CX601 Mill/Drill is a fine addition to your shop. The 33-1/16" x 8-1/4" table provides a large work space and the T-slots allow...
    CX601
    Now: CAD $3,599.00
    Was: $3,999.00
    Add to Cart
  • LATHE/MILL COMBINATION 110V 3/4HP 60HZ CX615

    Craftex CX Series

    LATHE/MILL COMBINATION 110V 3/4HP 60HZ CX615

    Now: CAD $3,349.00
    Was: $4,299.00
    CX615 16" x 20" Mill Lathe Combination This combination Mill Lathe is an excellent machine for any metalworker, from the hobbyist to the veteran machinist. Not only will it save space in your shop, but it has the features to allow you to tackle a wide...
    CX615
    Now: CAD $3,349.00
    Was: $4,299.00
    Add to Cart
  • MILL DRILL 6IN. X21IN. CX SERIES 1 1/4 HP CSA CX611

    Craftex CX Series

    MILL DRILL 6IN. X21IN. CX SERIES 1 1/4 HP CSA CX611

    Now: CAD $3,099.00
    Was: $3,999.00
    CX611 6" x 21" Mill / Drill with Variable Speed - Craftex CX-Series This 6" x 21" mill / drill is carefully built for accuracy and rigidity. Just like larger and expensive mills, the headstock on the CX611 tilts up to 90° to the right and 30°...
    CX611
    Now: CAD $3,099.00
    Was: $3,999.00
    Add to Cart
  • MILLING MACHINE DIGITAL READOUT R8 CX600

    Craftex CX Series

    MILLING MACHINE DIGITAL READOUT R8 CX600

    Now: CAD $2,499.00
    Was: $2,699.00
    CX600  Mill Drill with R8 Taper and Digital Readout – Craftex CX-Series While the CX600 measures in a bit smaller than its big brother, the CX601, the CX600 has almost all the same great features. This machine features a powerful 3/4HP...
    CX600
    Now: CAD $2,499.00
    Was: $2,699.00
    Add to Cart
  • MINI MILL 3/4HP BRUSHLESS MOTOR CX SERIE CX612

    Craftex CX Series

    MINI MILL 3/4HP BRUSHLESS MOTOR CX SERIE CX612

    Now: CAD $1,699.00
    Was: $1,999.00
    CX612 3/4 HP Mini Mill with Brushless Motor - Craftex CX-Series The CX612 can handle any kind of job up to 5/8" drilling, 5/8" end mill and 1-3/8" facing with ease and is a great addition to any small shop. The variable speed feature on this mini mill...
    CX612
    Now: CAD $1,699.00
    Was: $1,999.00
    Add to Cart
  • MILLING MACHINE MINI CRAFTEX CSA CX605

    Craftex CX Series

    MILLING MACHINE MINI CRAFTEX CSA CX605

    Now: CAD $999.00
    Was: $1,499.00
    CX605 Mini Milling Machine - Craftex CX-Series The CX605 is a small, high accuracy and affordable milling and drilling machine. It features a 1/2 HP motor and has a maximum milling capacity of 5/8" and drilling capacity of 1/2". The precision ground...
    CX605
    Now: CAD $999.00
    Was: $1,499.00
    Add to Cart
  • STAND FOR CX611

    Craftex CX Series

    STAND FOR CX611

    Now: CAD $589.00
    Was: $649.00
    ÿþCX611ST Optional Stand for CX611 Mill / Drill - Craftex CX-Series Stand for CX611 - 6" x 21" Mill / Drill Overall Dimensions: 17" x 31" x 26"
    CX611ST
    Now: CAD $589.00
    Was: $649.00
    Add to Cart
  • STAND FOR MILL LATHE COMBO CX615

    Craftex CX Series

    STAND FOR MILL LATHE COMBO CX615

    CAD $499.00
    Stand For CX615 Lathe/Mill Combination This the optional stand for the CX615 Lathe/Mill Combination. The dimensions of the stand are 42 1/2" x 19" x 27" high with 1" deep tray with an open shelf that accommodates the CX615. Also has room to store all of...
    CX615ST
    CAD $499.00
    Add to Cart
  • ROTARY TABLE 6IN. C/W TAIL STOCK/INDEXING

    ROTARY TABLE 6IN. C/W TAIL STOCK/INDEXING B2485

    Now: CAD $479.00
    Was: $575.00
    6" Rotary Table, Horizontal/Vertical Fine grade cast iron Precision ground hardened worm Ratio: 90:1 360degree graduations Comes with Index Plates and Tail Stock
    B2485
    Now: CAD $479.00
    Was: $575.00
    Add to Cart
  • 5IN. LOCK DOWN MILLING VISE CRAFTEX CX

    Craftex CX Series

    5IN. LOCK DOWN MILLING VISE CRAFTEX CX

    Now: CAD $399.00
    Was: $499.00
    Manufactured from graded cast iron and precision ground, these vises have a needle bearing thrust collar. High end precision lock down vises allow you to turn your best work, with high confidence. Specifications: Jaw Width: 5" (125mm) Jaw Opening: 5"...
    CXVISE9
    Now: CAD $399.00
    Was: $499.00
    Add to Cart
  • STAND FOR MILLING MACHINE CX601

    Craftex CX Series

    STAND FOR MILLING MACHINE CX601 CX601ST

    CAD $379.00
    CX601ST Optional Stand for CX601 Mill / Drill - Craftex CX-Series Featuring heavy gauge welded steel construction this optional stand is designed for CX601 Mill / Drill. The stand is 14-3/4" in length and features a storage cabinet with a shelf and a...
    CX601ST
    CAD $379.00
    Add to Cart
  • COOLANT PUMP FOR METAL WORKING MACH. CSA

    COOLANT PUMP FOR METAL WORKING MACH. CSA B3087

    Now: CAD $339.00
    Was: $449.00
    B3087 Coolant Pump System with Magnetic Base The B3087 Coolant Pump System can be used with any metal cutting machine for reduced tool wear, efficient cutting and better finishes. The coolant pump has a maximum capacity of 5 gallons and comes with...
    B3087
    Now: CAD $339.00
    Was: $449.00
    Add to Cart
  • 4IN. LOCK DOWN MILLING VISE CRAFTEX CX

    Craftex CX Series

    4IN. LOCK DOWN MILLING VISE CRAFTEX CX

    Now: CAD $299.00
    Was: $399.00
    Manufactured from graded cast iron and precision ground, these vises have a needle bearing thrust collar. High end precision lock down vises allow you to turn your best work, with high confidence. Specifications: Jaw Width: 4 1/8" (104mm) Jaw Opening: 3...
    CXVISE8
    Now: CAD $299.00
    Was: $399.00
    Add to Cart
  • RAPID INDEXER 6IN. BASE WITH 3 JAW CHUCK

    RAPID INDEXER 6IN. BASE WITH 3 JAW CHUCK

    CAD $299.00
    RAPID INDEXER 3 Jaw Chuck 3 3/16" Useful for 2 direction horizontal & vertical milling & drilling operations. It has a 3 jaw chuck fitted on the head for big range clamping. The indexer has a simple rapid operation with dividual number 24 - notch (15...
    B2725
    CAD $299.00
    Add to Cart
  • ROTARY TABLE 4IN. LOW PROFILE W/TILT.TABLE

    ROTARY TABLE 4IN. LOW PROFILE W/TILT.TABLE

    CAD $299.00
    Titling Rotary Table Ideal for engineering applications small enough to be mounted on small mills or on a lathe vertical slide or cross slide. The table tilts up to 90 degrees with a scale marked in 1-degree graduations. The table itself is graduated...
    B2424
    CAD $299.00
    Add to Cart
  • STAND FOR MILLING MACHINE CX600

    Craftex CX Series

    STAND FOR MILLING MACHINE CX600 CX600ST

    Now: CAD $299.00
    Was: $349.00
    CX600ST  Optional Stand for CX600 Mill / Drill - Craftex CX-Series  Featuring heavy gauge welded steel construction this optional stand is designed for CX600 Mill / Drill. The stand is 14-3/4" in length and features a storage cabinet with a...
    CX600ST
    Now: CAD $299.00
    Was: $349.00
    Add to Cart
  • CHUCK 3 JAW FOR CX615 B2229

    Craftex CX Series

    CHUCK 3 JAW FOR CX615 B2229

    CAD $249.00
    CX615CHUCK CHUCK 3 JAW FOR CX615,B2229 3 Jaw Chuck for CX615 (LATHE/MILL COMBINATION 110V 3/4HP 60HZ) and B2229 (LATHE/MILL COMBINATION 110V 3/4HP 60HZ)
    CX615CHUCK
    CAD $249.00
    Pre-Order Now
  • MILLING TABLE 5IN. X 12IN.

    MILLING TABLE 5IN. X 12IN.

    CAD $245.00
    H. D. Cross Sliding Table This heavy-duty compound slide table can be used for several applications e.g. positioning, milling, line drilling & optical viewing. Specifications Table surface: 5 1/2" x 12" Table Cross Travel: 5" Table Longitudinal...
    B339C
    CAD $245.00
    Pre-Order Now
  • END MILL 20PC SET TITANIUM COATED METRIC

    END MILL 20PC SET TITANIUM COATED METRIC

    CAD $239.00
    End Mills 20pc Set - Metric Excellent performance in hard materials that are difficult to cut. High productivity with long tool life. Sizes in 2 flutes: 20, 16, 14, 12, 10, 8, 6, 5, 4, 3mm In 4 flutes - same as 2 flutes
    B1890M
    CAD $239.00
    Add to Cart
  • ELEVATING BLOCK FOR B2229 AND B2071 CX615

    Craftex CX Series

    ELEVATING BLOCK FOR B2229 AND B2071 CX615

    CAD $209.00
    CX615SB Elevating Block Elevating block for Mill/Drill Model CX615 8" x 6" x 5" high heavy cast iron with two 1/2" T slots and uses the standard 7/16" t-slot nuts. One of the biggest challenges for milling a small flat object is getting the mill close to...
    CX615SB
    CAD $209.00
    Add to Cart
  • END MILL 20PC TITANIUM COATED IMPERIAL

    END MILL 20PC TITANIUM COATED IMPERIAL

    Now: CAD $199.00
    Was: $269.00
    End Mills 20pc Set - Inches Excellent performance in hard materials that are difficult to cut. High productivity with long tool life. Sizes in 2 flutes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", & 3/4" In 4 flutes - same as 2...
    B1890
    Now: CAD $199.00
    Was: $269.00
    Add to Cart
  • 81PC STEEL GAUGE BLOCK SET GRADE AS 2

    81PC STEEL GAUGE BLOCK SET GRADE AS 2

    CAD $189.00
    Manufactured under carefully controlled conditions allowing for the highest degree of accuracy when used at a temperature of 68 degrees F (20 degree C). All gauge block sets are assigned serial numbers and are accompanied with a certificate of inspection...
    B4029
    CAD $189.00
    Add to Cart
  • 4IN. PRECISION MACHINE VISE CRAFTEX CX

    Craftex CX Series

    4IN. PRECISION MACHINE VISE CRAFTEX CX

    CAD $155.00
    CXVISE3 This Accu-lock machine vise is ideal for heavy duty precision milling & drilling applications and features perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. The vise features an angle lock...
    CXVISE3
    CAD $155.00
    Add to Cart
  • BORING HEAD SET 3/8IN. W/R8 ARBOR AND CUTTER

    BORING HEAD SET 3/8IN. W/R8 ARBOR AND CUTTER

    CAD $155.00
    Boring Head Rugged construction for chatter-free boring and accuracy Bar holder moves freely and smoothly. When locked in place it holds firmly against tool-cutting pressures Micrometer lead-screw provides .001" direct reading accuracy With R8 arbor and...
    B2552
    CAD $155.00
    Add to Cart
  • ROTARY TABLE 4IN. HOR/VER

    ROTARY TABLE 4IN. HOR/VER

    Now: CAD $149.00
    Was: $185.00
    B2724 Horizontal/Vertical Rotary Table 4” This rotary table is ideal for milling and multi-purpose work and anyone creating smaller precision work. The table features a whole degree scale on the dial, lash adjustment screw, worm gear drive, reference...
    B2724
    Now: CAD $149.00
    Was: $185.00
    Add to Cart
  • SPIN INDEX 5 C

    SPIN INDEX 5 C

    CAD $149.00
    5C-Spin Index Features And Mechanism: The indexing plate has 36 holes at 10" intervals, so permitting the dividing into 2, 3, 4, 6, 8, 12, 18 or 36 parts. Method Of Using Vernier Holes Example: Index 32o First place in 0o position of front plate and...
    B049
    CAD $149.00
    Add to Cart
  • 5IN. PRECISION MACHINE VISE CRAFTEX CX

    Craftex CX Series

    5IN. PRECISION MACHINE VISE CRAFTEX CX

    Now: CAD $139.00
    Was: $169.00
    CXVISE1 This Accu-lock machine vise is ideal for heavy duty precision milling & drilling applications and features as swivel base, perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. This high...
    CXVISE1
    Now: CAD $139.00
    Was: $169.00
    Add to Cart
  • END MILL 10PC SET TIN COATED 4FLT

    END MILL 10PC SET TIN COATED 4FLT

    CAD $139.00
    10pc Set End Mills Titanium Nitride Coated - H.S.S. - 4 flutes Size: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16". & 3/4" Includes: Wood Case
    B2158
    CAD $139.00
    Pre-Order Now
  • END MILL 2IN. WITH 3 CARBIDE INSERTS R8

    END MILL 2IN. WITH 3 CARBIDE INSERTS R8

    CAD $129.00
    End Mill with Carbide Insert - R8 Arbor This 2" end mill comes with 3 carbide inserts. It is excellent for facing off excessive material quickly, leaving a smooth and even finish. A Must for Any Machine Shop|
    B2136R8
    CAD $129.00
    Add to Cart
  • TUBE CENTRE MT3

    TUBE CENTRE MT3

    CAD $129.00
    Tubing Center This well constructed tubing center is ideal for hollow work pieces like pipes & tubing. With sealed ball bearing you don't have to worry about dust getting in. MT3 Large Diameter: 3" Small Diameter: 3/4"
    B2829
    CAD $129.00
    Pre-Order Now
  • END MILL 10PC SET HSS 4FLT

    END MILL 10PC SET HSS 4FLT

    CAD $119.00
    10 PC. Set End Mills – 4 Flute - H.S.S Size: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16". & 3/4" Includes: Wood Case
    B2156
    CAD $119.00
    Add to Cart
  • END MILL 2IN. WITH 3 CARBIDE INSERT MT3

    END MILL 2IN. WITH 3 CARBIDE INSERT MT3

    CAD $119.00
    End Mill with Carbide Insert - MT Arbor This 2" end mill comes with 3 carbide inserts. Excellent for facing off excess material quickly, leaving a smooth and even finish. A Must For Any Workshop|
    B2136MT3
    CAD $119.00
    Add to Cart
  • 4IN. TILTING MACHINE VISE CRAFTEX CX SERIE

    Craftex CX Series

    4IN. TILTING MACHINE VISE CRAFTEX CX SERIE

    Now: CAD $109.00
    Was: $169.00
    CXVISE2 This precision tilting machine vise is made from high quality cast iron construction and features a vise accuracy (parallelism & square) of 0.025mm/100mm. Features a 360° swivel rotating base and can be tilted in any position from 0°...
    CXVISE2
    Now: CAD $109.00
    Was: $169.00
    Add to Cart
  • END MILL 10PC SET HSS 2FLT

    END MILL 10PC SET HSS 2FLT

    CAD $109.00
    10pc Set End Mills - H.S.S. - 2 flutes Size: 3/16", 1/4", 5/16", 3/8", 7/16", 11/2", 9/16", 5/8", 11/16". & 3/4" Includes: Wood Case
    B2155
    CAD $109.00
    Add to Cart
  • MILLING VISE LOW PROFILE 1 7/8IN.

    MILLING VISE LOW PROFILE 1 7/8IN.

    CAD $109.00
    B2715 Precision Tool Makers Vise This high precision toolmakers vise is manufactured from hardened 55-60 HRC tool steel & is high precision ground. The vise has recessed pockets at both ends for clamping. Ideal for milling machines and mini mills like...
    B2715
    CAD $109.00
    Add to Cart
  • DELUXE 52PC CLAMPING KIT METRIC M10 BB110

    Busy Bee Tools

    DELUXE 52PC CLAMPING KIT METRIC M10 BB110

    CAD $99.99
    This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps.  Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also...
    BB110
    CAD $99.99
    Pre-Order Now
  • 5IN. PRECISION DRILLING VISE CRAFTEX CX SE

    Craftex CX Series

    5IN. PRECISION DRILLING VISE CRAFTEX CX SE

    Now: CAD $89.99
    Was: $119.00
    CXVISE7 This high quality drilling & milling vise is ideal for heavy duty precision applications and features as swivel base, perfectly aligned, precision ground jaws and vise accuracy (parallelism & square) of 0.025mm/100mm. This vise is widely used...
    CXVISE7
    Now: CAD $89.99
    Was: $119.00
    Add to Cart
  • DELUXE 52PC CLAMPING KIT 1/2IN. X 13NC WIL

    Busy Bee Tools

    DELUXE 52PC CLAMPING KIT 1/2IN. X 13NC WIL

    Now: CAD $87.99
    Was: $99.99
    This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps. Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also includes...
    BB111
    Now: CAD $87.99
    Was: $99.99
    Add to Cart
  • DELUXE 52PC CLAMPING KIT 3/8 X 16NC BB109

    Busy Bee Tools

    DELUXE 52PC CLAMPING KIT 3/8 X 16NC BB109

    Now: CAD $87.99
    Was: $99.99
    This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps.  Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also...
    BB109
    Now: CAD $87.99
    Was: $99.99
    Add to Cart
  • 4IN. TILTING PRECISION VISE

    Craftex CX Series

    4IN. TILTING PRECISION VISE

    Now: CAD $79.99
    Was: $95.00
    This precision tilting machine vise is made from high-quality cast-iron construction. This vise can be tilted and locked in any position from 0° - 90° lending itself to many milling applications. Trust this vise for heavy duty precision milling...
    CXVISE10
    Now: CAD $79.99
    Was: $95.00
  • ANGLE PLATE SLOTTED 6IN.

    ANGLE PLATE SLOTTED 6IN.

    CAD $74.99
    Angle Plate Slotted cast iron Machine finish Dimensions: Side 1, 3 slots, 5.00" x 0.56"Side 2, 2 slots, 4.46" x 0.56"Length is 5.99"
    B9876
    CAD $74.99
    Add to Cart
  • DELUXE 52PC CLAMPING KIT M12 X 16

    Busy Bee Tools

    DELUXE 52PC CLAMPING KIT M12 X 16

    Now: CAD $69.99
    Was: $99.99
    This premium Clamping Kit features a wide assortment of Step Blocks and Step Clamps.  Overall high quality build on all components and comes complete in a sturdy blow mold case which will keep your set in tact and safe. This 58 piece set also...
    Clearance
    BB113
    Now: CAD $69.99
    Was: $99.99
    Add to Cart
  • ELECTRONIC EDGE FNDER

    Groz

    ELECTRONIC EDGE FINDER

    CAD $52.99
    Electronic Edge Finder - GROZ This edge finder is an accurate and time saving tool for precisely locating work edges, shoulders, grooves etc. Ideal for use on both conventional and CNC equipment. The edge finder lights up instantly when the stylus...
    B2700
    CAD $52.99
    Add to Cart
  • END MILL HOLDER 1IN. R8

    END MILL HOLDER 1IN. R8

    CAD $42.99
    R8 End Mill Holders - 1" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B160
    CAD $42.99
    Add to Cart
  • END MILL HOLDER 3/4IN. R8

    END MILL HOLDER 3/4IN. R8

    CAD $40.99
    R8 End Mill Holders - 3/4" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B158
    CAD $40.99
    Add to Cart
  • E.M. HOLDER MT 3 3/8

    E.M. HOLDER MT 3 3/8

    CAD $39.99
    Morse Taper End Mill Holder - Taper: 3, size 3/8" For Weldon Shank End mills Precision ground and hardened to 50 RC concentric with .0006" All morse taper holders are threaded for 3/8" - 16 Drawbar
    415430
    CAD $39.99
    Add to Cart
  • E.M. HOLDER MT 3 1/2

    END MILL HOLDER ½IN. MT3 DRAWBAR

    CAD $39.99
    End Mill Holder Size 1/2Morse Taper MT3 For Weldon Shank End mills Drawbar Threaded 3/8"-16Precision ground and hardened to 50 RC concentric with .0006" Precision ground and hardened to 50 RC concentric with .0006"
    415435
    CAD $39.99
    Pre-Order Now
  • FLY CUTTER SET WITH TOOL BITS

    Woodstock

    FLY CUTTER SET WITH TOOL BITS

    CAD $38.99
    These black oxide finish Fly Cutter are each supplied with a set screw flat and a blank high-speed steel tool. 3/4", 1-1/8", and 1-3/8" head sizes with 1/2" shanks. 3/16", 1/4", and 5/16" bit sizes. Stand included. Specifications Head sizes: 3/4",...
    M1096
    CAD $38.99
    Add to Cart
  • STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Groz

    STEEL SQUARE SET 4 PC: 2IN. 3IN. 4IN. AND 6IN.

    Now: CAD $38.99
    Was: $42.99
    4pc Steel Square Set Made by "GROZ" Sizes: 2", 3", 4" & 6" Hardened spring steel fixed to the stock with tapered self-locking rivets Blade and stock precision ground Working edges of the blade are lapped to increased accuracy
    B2582
    Now: CAD $38.99
    Was: $42.99
    Add to Cart
  • END MILL HOLDER 1/2IN. R8

    END MILL HOLDER 1/2IN. R8

    CAD $28.99
    R8 End Mill Holders - 1/2" for Weldon Shank End Mills Made from high quality heat-treated steel R8 tapers are threaded for 7/16" draw bar 20 TPI
    B156
    CAD $28.99
    Add to Cart
  • SLITTING SAW 3 X 1/8

    SLITTING SAW 3 X 1/8

    CAD $24.99
    T747075 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/8"
    T747075
    CAD $24.99
    Add to Cart
  • 1 2 3 BLOCK

    1 2 3 BLOCK

    Now: CAD $23.99
    Was: $30.99
    A 1-2-3 block is a layout tool that can be used for both metal and woodworking. As the name suggests, the block's thickness is 1", the width is 2", and the length is 3". A quick and accurate reference to those sizes in a convenient package for all sorts...
    B653
    Now: CAD $23.99
    Was: $30.99
    Add to Cart
  • SLITTING SAW 3 X 1/16

    SLITTING SAW 3 X 1/16

    CAD $21.99
    T747055 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/16"
    T747055
    CAD $21.99
    Add to Cart
  • CLAMPING KIT FOR B2424

    CLAMPING KIT FOR B2424 B2424KIT

    CAD $20.99
    B2424KIT Clamping Kit for B2424 Rotary Table This clamping kit is consisting of two strap clamps, two step blocks, two 2-1/8" (55mm) long bolts, 12mm square T-nuts and two nuts.
    B2424KIT
    CAD $20.99
    Add to Cart
  • FLY CUTTER 1/2IN. 3PC SET

    FLY CUTTER 1/2IN. 3PC SET

    Now: CAD $19.99
    Was: $29.99
    Fly Cutter SetTop QualityCounter balancedMade of hardened steelUses standard tool-bitsShank Dia.: 1/2"Includes Head Dia.: 3/4", 1 1/8", 1 1/2"Standard Tool Bit Size: 3/16", 1/4", 5/16"
    B090N
    Now: CAD $19.99
    Was: $29.99
    Add to Cart
  • SLITTING SAW 3 X 1/32

    SLITTING SAW 3 X 1/32

    CAD $19.99
    T747045 3" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 3" Thickness: 1/32"
    T747045
    CAD $19.99
    Pre-Order Now
  • SLEEVE R8/MT2

    SLEEVE R8/MT2

    CAD $18.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT2
    B273
    CAD $18.99
    Pre-Order Now
  • SLEEVE R8/MT3

    SLEEVE R8/MT3

    CAD $18.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From R8 to MT3
    B272
    CAD $18.99
    Pre-Order Now
  • SLITTING SAW 2 1/2 X 1/16

    SLITTING SAW 2 1/2 X 1/16

    CAD $18.99
    T747025 2-1/2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2-1/2" Thickness: 1/16"
    T747025
    CAD $18.99
    Add to Cart
  • SLITTING SAW 2 1/2 X 1/32

    SLITTING SAW 2 1/2 X 1/32

    CAD $18.99
    T747015 2-1/2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2-1/2" Thickness: 1/32"
    T747015
    CAD $18.99
    Add to Cart
  • SLITTING SAW 2 X 1/16

    SLITTING SAW 2 X 1/16

    CAD $17.99
    T747005 2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2" Thickness: 1/16"
    T747005
    CAD $17.99
    Pre-Order Now
  • SLITTING SAW 2 X 1/8

    SLITTING SAW 2 X 1/8

    CAD $17.99
    T747010 2" Slitting Saw This High Speed Steel Slitting Saws is perfect for slitting thin wall tubing, sheets or screw heads. Diameter: 2" Thickness: 1/8"
    T747010
    CAD $17.99
    Add to Cart
  • END MILL 3PC SET TIN COATED

    END MILL 3PC SET TIN COATED

    Now: CAD $16.99
    Was: $36.99
    End Mills - 3pc Set Titanium Nitride Coated (4 flutes) Sizes 1/8", 1/4" and 3/8" Includes wood case
    B2154
    Now: CAD $16.99
    Was: $36.99
    Add to Cart
  • SLEEVE MT 4/2

    SLEEVE MT 4/2

    CAD $15.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT4 to MT2
    B497
    CAD $15.99
    Pre-Order Now
  • ARBOR SLITTING SAW

    Groz

    ARBOR SLITTING SAW

    CAD $14.99
    Slitting Saw Arbor Spring loaded mechanism Fits all sizes from 1/2" to 1" bore Shank dia.: 1/2" Step Arbor: ½”, 5/8”, ¾”, 7/8” and 1”
    B044
    CAD $14.99
    Add to Cart
  • SLEEVE MT 4/3

    SLEEVE MT 4/3

    CAD $14.99
    R8 And Morse Taper Sleeves - From MT4 to MT3 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT4 to MT3
    B498
    CAD $14.99
    Add to Cart
  • STUB ARBOR MT 3 X 1IN.

    Groz

    STUB ARBOR MT 3 X 1IN. B461

    CAD $14.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B461
    CAD $14.99
    Add to Cart
  • STUB ARBOR MT 2 X 1IN.

    Groz

    STUB ARBOR MT 2 X 1IN.

    CAD $12.99
    MT Arbor With Straight Stub We have specially ordered these for applications where regular tapered and hardened arbor cannot be used. However, the straight shank portion is soft. Hence, they can be machined to adapt for special applications. Taper...
    B460
    CAD $12.99
    Add to Cart
  • SLEEVE MT2/MT1

    SLEEVE MT2/MT1

    CAD $11.99
    R8 And Morse Taper Sleeves - From MT2 to MT1 Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT2 to MT1
    B343
    CAD $11.99
    Add to Cart
  • SLEEVE MT3/MT2

    SLEEVE MT3/MT2

    CAD $11.99
    R8 And Morse Taper Sleeves Hardened & Ground Tool-Steel Precision drill sleeves to use Morse Taper tooling in R8 spindles or using smaller MT tooling in larger MT spindles| Taper reduction: From MT3 to MT2
    B342
    CAD $11.99
    Add to Cart
  • NUT T SLOT 3/8 16 4PC/PKT

    NUT T SLOT 3/8 16 4PC/PKT

    CAD $8.99
    Heat Treated Black Oxide Finished 4pc Sets T-Slot Nuts Size: 3/8" - 16 NC Imperfect thread in base to prevent damage to table slot
    B230238
    CAD $8.99
    Add to Cart
  • DRIFT KEY MT2 3

    DRIFT KEY MT2 3

    CAD $7.99
    This Drift Key quickly removes taper shank drills or reamers from sleeves or sockets.  For use with MT2 – MT3 Made of top quality hardened steel
    B299
    CAD $7.99
    Add to Cart

Milling Machines, Mini Mills & Accessories

Our selection of horizontal milling machines and vertical milling machines provides the choices you can count on for reliable machinery that gets the job done. We carry a variety of sizes depending on project requirements, including drilling and boring.

These high-tech cutting tools provide precision control, giving you the results you expect. Our quality drilling and turning machines include a manufacturer's warranty, allowing you to work with confidence.

We carry several quality mini milling machines that offer great drilling, milling and facing capacity for their compact size. These Craftex machines also include the safety features you expect, for your peace of mind.

In need of a full size mill? Craftex has you covered with milling machines and knee mills that can process your largest machining projects with superior precision. Plus, each powerful tool comes with a three-year warranty that protects your investment.

Milling accessories can give you more versatility in your machining projects. Busy Bee Tools carries metal milling bits, milling machine parts, sleeves and other milling equipment so you can take on any project you can think up.

Consider these milling accessories:

Discover extraordinary precision and convenient operation by pairing a Craftex Milling Machine with the right accessories for your job.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley