Routers

  This unit provides full variable speed control on your single speed router or laminate trimmer. This control is equipped with a 3 position switch that allows you to operate your router at full speed or variable speed settings, as well as control...

Router Table Insert 3/8” phenolic plate with inserts for 1 1/4”, 2 5/8”, and 3 7/8” openings. Size 9” x 12”

PRS2100 Precision Benchtop Router Table - KREG Rugged Steel Stand with Vibration Dampening Rubber Feet Professionally Edge banded Reinforced MDF Top (16" x 24") Tabletop Height of 16" Impact Resistant Easy-Slide™ Micro-Dot Skin Full-Size Router Insert...

Router Table With Fence This router table can handle it all. The table measures 27" x 23 1/2" x 1 3/8" and comes with a 3/4" mitre track and fence track already installed. There is a custom fit table insert 12" x 9" x 3/8" with removable insert rings so...

B2944 Router Table with Fence and Stand - CRAFTEX  This router table combo is the complete package. It features a large M.D.F table & fence with dust port, Universal table insert and a strong steel stand with non marring rubber feet. This...

B3934 ROUTER UNIVERSAL BASE PLATE This acrylic see through Universal Router Base Plate will help enhance your visibility and increase stability of your router while allowing your router to accept Porter Cable style guide bushings. Fits most makes and...

This 27" cast iron table is built to fit either the SawStop Benchtop Stand or be installed in-line between SawStop TGP2 series table saw rails. Features: Actual dimensions: 27" w, 16" d, 1 1/2" hMaximize your shop space with the in-line...

Optimize your SawStop saw with this In-Line Router Table Assembly. On a Professional Cabinet Saw, replace your extension table with beautiful cast iron. On a Professional or Contractor Saw, install to the left of the saw. Includes a 27" x 16" precision...

4 pc Phenolic Insert Ring Set for Router Plates. These phenolic inserts are graduated in size for quick-change versatility. Specifications: Actual dimensions: 3 3/4" w, 3 3/4" d, 1 1/4" hUltra-strong phenolic core material to reduce tear-out and chip...

Engineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangeable panels for optimum dust port and Vent placement. Plug the 2...

Designed to fit SawStop RT Fence Assemblies, this flip stop is built to facilitate repeated cuts with precision. Features: Designed to quickly give you accurate, repeatable measurementsCompatible with all SawStop Router FencesTop-mounted dovetail track...

Built for heavy-duty precision, the SawStop Router Lift features a chain-synchronized four-post lifting system, positive lock, precision above-table elevation measurement and adjustments, and adaptive collars to fit multiple router sizes. 9.25" x 11.75"...

This set of two bits allows you to quickly and easily create the joinery required for rail and stile doors. The included bearings allow you to work on both straight and curved work. These bits paired with one of our raised panel bits will make elegant...

New Sign Pro - MilesCraft The Sign Pro has the improved features of Sign Crafter and is by far MilesCraft's best sign making jig. Easily create up to 36" long signs that are professional looking and less time consuming. To increase the stability, the...

B2378 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits...

B237712 UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router ...

UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...

UHMW Sheets This Ultra High Molecular Weight sheet is perfect for jigs and fixtures. This nonstick, low friction sheet gives extra smooth sliding action for jigs, fixture and fences. Easily machined with carbide tipped saw blades and router bits. Useful...

Panel raising bits are used to create a raised field commonly seen on cabinet doors, but they can also be used for decorative edge work. Designed for use with 3/4" stock, this cutter can also be used to make plaques, moldings, or even decorative tops. ...

KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.

B2487 Safety Switch This switch is ideal for connecting portable power tool to a table, such as router table or mitre saw stand. 10 Amp rating at 115V

Template Guide This template guide will fit Black & Decker, DeWalt, Freud, Hitachi, Porter Cable, Skil, and any other router with a 1 3/16" centre hole. Outside Dia: 5/8" Inside Dia: 17/32" Guide Height: 9/16"

This bit is used to create Tongue and Groove joinery often seen in panel construction. Features adjustable cutting length depending on your project. To be used on a router table only and Best to be used in 3/4" material. SPECIFICATIONS Diameter: 1-3/4"...

This complete set of three bits allows you to cut both the rails and stiles, as well as the panel to make a raised panel door. The bits come housed in a wooden box so that they are always together and ready when you want to work. SPECIFICATIONS Raised...

Cut perfect circles, arcs, and radius corners for tabletops, lazy Susan’s and wheels. Features: Cut 8" to 48" in diameter circles. Specifications: Material: PC

B3028 Universal Feather Board - MAG SWITCH Works On Both Sides Of The Blade, And Even The Fence. Low profile and double sided, this is the ultimate featherboard from Magswitch. Works to improve your cutting results on either side of the blade. Also...

B3059 2-pc Universal Fence Clamps Shop made auxiliary fences have never been so easy to hold. These 2-pc Universal Fence Clamps allow holding 3" to 4-1/2" thick shop made auxiliary fence to your existing fence without the clamp interfering with your...

Vertical raised panel bits allow you to make a full size raised panel using 3/4" stock vertically. The smaller diameter is great for use with single speed routers and lower horsepower routers. SPECIFICATIONS Diameter: 1-1/8" Cutting Length: 1-5/8"...

This set features a Wedge Tongue & Groove Bit Set, commonly used for glued or non-glued joints on panels. These bits are designed for use on a router table only. The bits come housed in a wooden box so that they are always together and ready when you...

This two-bit set make it a breeze to create your own traditional sash windows. The bits come in a wooden box to keep them together for when you need them. SPECIFICATIONS Cutting Diameter: 1-1/2" Cutting Length: 5/8" Large Radius: 1/4" Overall Length:...

The ¼” x 1” Up-Spiral Bit has the same qualities as our stock ¼” cutter—including carbide composition, dual flute geometry, and compatibility with Origin’s ¼” collet—with the added benefit of...

With a 1.5” cutting length, this bit gives you the freedom to make deep cuts in acrylics with accuracy and durability. The polished o-flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity. Appropriate...

The ¼” X ¾” Up-Spiral Ball Nose Router Bit cuts smooth channels that are ideal for a wide range of applications, from cutting board juice channels to dimensional signage and text. With solid carbide composition and upcut...