Dust Collection Accessories

Help protect your dust collector from unnecessary wear and tear with this Dust Separator DIY Kit. The kit consists of two elbows and two couplers to give you in-feed and outfeed points when they are installed on a barrel, box, or any container (Please...

4" Thru-Wall Port Kit makes it easy to keep your shop vacuum tucked away quietly in another room. Great for reducing the ambient noise in your shop by allowing the dust collection suction to pass through walls r ceilings. This kit includes two special...

2-1/2" Thru-Wall Port Kit makes it easy to keep your shop vacuum tucked away quietly in another room. Great for reducing the ambient noise in your shop by allowing the dust collection suction to pass through walls r ceilings. This kit includes two...

Switch with Remote Controller for Dust Collectors Activate your dust collector from anywhere in your shop. 110V, 15 Amp works with all 110V dust collectors up to 1 1/2 HP Optional Items Available Model CT075B - Batteries Model CT075220 - 220V Remote...

iVac Switch The iVac automatically turns your dust collection system on as soon as your power tool is turned on. A great tool that can save time and make your shop a safer place to work in. This tool is intended to be used in conjunction with a dust...

Cyclone Separator To be used with 5 Gallon Buckets 11 3/4" diameter Allows heavier particles to drop out of air stream Just lift off the bucket to make clean up easy To be used with 2 1/2" Shop-Vac hose

Cyclone Separator To be used with standard trash cans 20 3/4" diameter Allows heavier particles to drop out of air stream Just lift off the bucket to make clean up easy

Our all new Cyclone Separator is perfect for dust and chip separation for use with your existing dust collector. This is a great economic way of turning your single stage dust collection setup in to a more efficient 2 stage without the need for buying a...

This hood is designed to fit most 8-Inch, 10-Inch and 12-Inch contractor-type table saws. Mounted face down when in operation, they’re easily adapted to other woodworking machines as well. A popular accessory with contractor saws as they can be...

This hood is designed to fit most 8-Inch, 10-Inch and 12-Inch contractor-type table saws. Mounted face down when in operation, they’re easily adapted to other woodworking machines as well. A popular accessory with contractor saws as they can be...

4" Bell Style Dust Collection Fitting with bell shaped opening is perfect for open-air dust collection. This dust hood features a flanged opening on the left and right that is perfect for mounting to a larger machine cabinet. Features: 4-1/4" x 8-1/4"...

This handy 2.5” dust collection port is a perfect fit for your router table fence. Simply just add this to your router table fence to better control the dust thrown by the router bit and significantly improve the dust extraction on this tool...

Capture dust from any machine operation with this BIG GULP FLOOR STANDING DUST COLLECTOR. Just attach a 4"dust collection hose and adjust the hood to the right height and position it where needed. The convenient free-standing base eliminates complicated...

This Eccentric Reducer provides a step-down from a larger main line to a smaller branch line. This step-down increases air velocity near the machine where it's needed the most. Please note that this item is not designed to fit directly to a machine's...

This Eccentric Reducer provides a step-down from a larger main line to a smaller branch line. This step-down increases air velocity near the machine where it's needed the most. Specifications: Reduce from 4" hose to 2-1/4" OD hoseOff center alignment...

Transparent Dust Collection Kit 2-1/2" This Dust Collection Kit is consist of tubing, pipe couplings, 45 & 90 degreeelbows, blast gates, T-connectors, brackets and hardware. All parts can jointogether forming a dust collection system that can...

W1053 Dust collection systems build up static electricity and if they are not properly grounded the electricity can become a serious hazard that could start a flash fire. Our grounding kit provides everything you need to ground a dust collection system,...

B3094 4" Adjustable Dust Control Handle This 4" adjustable dust control handle allows you to easily move your hose from machine to machine by simply clamping your 4" dust collection hose over the fitting port. The large handle can be adjusted to...

B3824 Mini Gulp Dust Hood The Mini Gulp dust hood is Ideal for collecting dust and wood chips from operations like wood turning, power carving and sanding. Includes 4 mounting holes 3/8" diameter and a grid to prevent larger pieces from entering your...

DUST HOSE UNIVERSAL HOOK HOLDER   4" Hose Clamp suitable for use with multiple hose materials 4" in diameter. Easy to install and uninstall for convenient dust collection in your shop. Great for keeping dust collection hoses neat and out...

Blast Gate Aluminum 4" for Dust Collector

MDC17 New Magnetic Dust Cover for steel table saws. This magnetic dust cover is used to cover the steel bevel Slot on your table saw to help improve dust collection from the cavity of your table saw. This is only for use when making 90-degree vertical...

AXH000200 If there's any tool in need of effective dust collection, it's your router. Chips are flying, dust is piling up, and you can barely see through cloud Finally, there's a solution that works for nearly any portable router! Easy to install and...

AXH000001 If there's any tool in need of effective dust collection, it's your router. Chips are flying, dust is piling up, and you can barely see through cloud Finally, there's a solution that works for nearly any portable router! Easy to install and...

AXD002040A Upgrade Your Tired, Old Dust Collector and Say Goodbye to Clogged Filters! Single-stage dust collectors are great for small, hobbyist shops but they come with a cost; fine dusts can quickly clog the filter, reducing suction and leaving your...

B3630 Y FITTING 4" X 2.5" X 2.5" Splitter for mating two 2.5" dust collection hoses to a single 4" diameter dust collection hose.

B3629 4" FLANGED INLET FITTING 5.5" diameter flanged fitting with pre-drilled holes for easy mounting. The fitting will accept 4" diameter dust collection hose.

B3628 2.5" FLANGED INLET FITTING 3.75" outside diameter flanged hose fitting for connection to 2.5" dust collection hose. Three pre-drilled holes in the flange rim for easy mounting. This item is suitable for attachment to smaller machinery,...

B3627 5" X 4" QUICK CONNECT REDUCER FITTING This quick connector reducer fitting is used to adapt a 4" dust collection hose to a 5" diameter collection hose. This connector Threaded for ease and secure mount of the 4" hose to the fitting.

B3626 5" QUICK CONNECT THREADED FITTING Used for connecting 5" dust collection hose to a 5" diameter collector port. This fitting is threaded for ease and secure mount of the hose to the fitting.

B3625 6" HOSE SPLICE FITTING This splice fitting is for connection of two 6" diameter dust collection hoses to each other.

B3624 DWV PVC PIPE TO 4" PORT FITTING Coupling to attach standard 4" PVC pipe or dust collector port to 4" diameter dust collection hose.

B3623 2.5" 45 DEGREE ELBOW A45 degree hose union with male ends, to accommodate 2.5" dust collection hose, on both ends.

B3622 DUST PORT ADAPTOR 2.5" Dust port adapter for router tables. It has a 2.5" diameter hose connection to a 90 degree flange to attach to the router table fence.

CXARM  Over Arm Blade Guard System Craftex CX-Series Add safety and dust collection to your table saw with this Over Arm Blade Guard.  This floor standing unit will fit just about any table saw and comes with an extra support bracket that...

If you buy a new machine, this kit is what you'll need to connect it to your dust collection system. This 4-piece kit contains all of the parts and accessories required to exhaust one machine. The kit is an economical savings over buying all the parts...

B3592 3-WAY DUST COLLECTION JUNCTION Now you can add more tools to your dust collection system by splitting off your main line with this new 3-way Dust Collection Junction. All ends have a 4" outside diameter and a 3-3/4" inside diameter. Combine this...

B3442 4" Wall Mount Self Cleaning Blast Gate  This wall mount self cleaning blast gate has a modified slider that automatically clears chips from the date track and prevents debris from inhibiting gate closure. It is an excellent...

B3441 4" Wall Mount Self-Cleaning Blast Gate This self cleaning blast gate can be mounted to a wall and clears itself each time it is opened/closed. The benefit in self cleaning blast gates is that no dust or debris can build up or get caught in the...

B3351 17" Steel Dust Pan Double riveted tubular steel handle High visibility cushioned grip Durable electroplate finish resists rust and corrosion