null

Woodworking

Woodworking

  • SANDING DISC 5IN. PEEL AND STICK CLOTH 180G
    Add to Cart

    Primex Abrasives

    SANDING DISC 5IN. PEEL AND STICK CLOTH 180G

    Now: CAD $2.49
    Was: $2.99
    180-Grit, 5" Peel and Stick Cloth Sanding Disc This sanding disc uses tough Aluminum Oxide grain. Just peel the paper at the back of disc and stick it on the sander. Grit: 180 Diameter: 5"
    SD5180
    Now: CAD $2.49
    Was: $2.99
    Add to Cart
  • SANDING DISC 5IN. PEEL AND STICK CLOTH 150G
    Add to Cart

    Primex Abrasives

    SANDING DISC 5IN. PEEL AND STICK CLOTH 150G

    Now: CAD $2.49
    Was: $2.99
    150-Grit, 5" Peel and Stick Cloth Sanding Disc This sanding disc uses tough Aluminum Oxide grain. Just peel the paper at the back of disc and stick it on the sander. Grit: 150 Diameter: 5"
    SD5150
    Now: CAD $2.49
    Was: $2.99
    Add to Cart
  • SANDING DISC 5IN. PEEL AND STICK CLOTH 120G
    Add to Cart

    Primex Abrasives

    SANDING DISC 5IN. PEEL AND STICK CLOTH 120G

    Now: CAD $2.49
    Was: $2.99
    120-Grit, 5" Peel and Stick Cloth Sanding Disc This sanding disc uses tough Aluminum Oxide grain. Just peel the paper at the back of disc and stick it on the sander. Grit: 120 Diameter: 5"
    SD5120
    Now: CAD $2.49
    Was: $2.99
    Add to Cart
  • SANDING DISC 5IN. PEEL AND STICK CLOTH 100G
    Add to Cart

    Primex Abrasives

    SANDING DISC 5IN. PEEL AND STICK CLOTH 100G

    Now: CAD $2.49
    Was: $2.99
    100-Grit, 5" Peel and Stick Cloth Sanding Disc This sanding disc uses tough Aluminum Oxide grain. Just peel the paper at the back of disc and stick it on the sander. Grit: 100 Diameter: 5"
    SD5100
    Now: CAD $2.49
    Was: $2.99
    Add to Cart
  • PRECISION MARKING RULE 12IN. INCRA
    Add to Cart

    Incra

    PRECISION MARKING RULE 12IN. INCRA

    CAD $20.99
    INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE12
    CAD $20.99
    Add to Cart
  • PRECISION MARKING RULE 6IN. INCRA
    Add to Cart

    Incra

    PRECISION MARKING RULE 6IN. INCRA

    CAD $10.99
    INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE06
    CAD $10.99
    Add to Cart
  • SANDING DISC 2IN. DIA A/O 400G 10/PACK
    Add to Cart

    Rapid Abrasives & Accessories

    SANDING DISC 2IN. DIA A/O 400G 10/PACK

    CAD $10.99
    Velcro Sanding Discs 10 PC/PK 2” Diameter Replacement Sanding Disc for RS412 – 2” Sponge Pad Aluminum Oxide Abrasive Paper 400 grit
    RS412A400
    CAD $10.99
    Add to Cart
  • SANDING DISC 2IN. DIA A/O 240G 10/PACK
    Add to Cart

    Rapid Abrasives & Accessories

    SANDING DISC 2IN. DIA A/O 240G 10/PACK

    CAD $10.99
    2" Velcro Sponge Disc to be used with Robert Sorby's Model RS412 Velcro Sponge Pad Grit: 240 Quantity: 10 Per Pack
    RS412A240
    CAD $10.99
    Add to Cart
  • SANDING DISC 2IN. DIA A/O 180G 10/PACK
    Add to Cart

    Rapid Abrasives & Accessories

    SANDING DISC 2IN. DIA A/O 180G 10/PACK

    CAD $10.99
    2" Velcro Sponge Disc to be used with Robert Sorby's Model RS412 Velcro Sponge Pad Grit: 180 Quantity: 10 Per Pack
    RS412A180
    CAD $10.99
    Add to Cart
  • SANDING DISC 2IN. DIA A/O 120G 10/PACK
    Add to Cart

    Rapid Abrasives & Accessories

    SANDING DISC 2IN. DIA A/O 120G 10/PACK

    CAD $10.99
    2" Velcro Sponge Disc to be used with Robert Sorby's Model RS412 Velcro Sponge Pad Grit: 120 Quantity: 10 Per Pack
    RS412A120
    CAD $10.99
    Add to Cart
  • SANDING DISC 2IN. DIA A/O 60G 10/PACK
    Pre-Order Now

    Rapid Abrasives & Accessories

    SANDING DISC 2IN. DIA A/O 60G 10/PACK

    CAD $10.99
    RS412A060 10/Pack 2" Diameter Sanding Disc 60-Grit This aluminum oxide sanding disc with Velcro pad is 2" in diameter and features 60 grit.
    RS412A060
    CAD $10.99
    Pre-Order Now
  • SPONGE PADS 2IN. DIA SORBY
    Add to Cart

    SPONGE PADS 2IN. DIA SORBY

    CAD $24.99
    2" Velcro Sanding Pad By Robert Sorby May be used with the "Sand Master" or separately Available - 2" Velcro Sponge Discs - 10 Per Pack Model Grit RS412A60 60 RS412A120 120 RS412A180 180 RS412A240 240
    RS412
    CAD $24.99
    Add to Cart
  • HOLLOWMASTER 3/4IN. SHANK SORBY
    Add to Cart

    Robert Sorby

    HOLLOWMASTER 3/4IN. SHANK SORBY

    CAD $138.99
    by "Robert Sorby" of England Hollow Master 3pc Set H.S.S. A full 3/4" surface gives ample support and prevents the tool from turning over Comes with a swiveling hollowing cutter and a full round scraper cutter Total length: 21" RS230C Replacement...
    RS230KT
    CAD $138.99
    Add to Cart
  • FEATHER BOARD TWIN PACK KREG
    Add to Cart

    Kreg

    FEATHER BOARD TWIN PACK KREG

    CAD $44.99
    KREG Feather Board Twin Pack The True-FLEXO Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in...
    PRS3020
    CAD $44.99
    Add to Cart
  • MITRE GAUGE V27 INCRA
    Add to Cart

    Incra

    MITRE GAUGE V27 INCRA

    CAD $102.99
    INCRA MITER GAUGE V27 The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter...
    MITER27
    CAD $102.99
    Add to Cart
  • MITRE GAUGE 1000 INCRA
    Add to Cart

    Incra

    MITRE GAUGE 1000 INCRA

    CAD $219.00
    MITER100018T INCRA MITER GAUGE 1000 If you are looking for a great combination of basic affordability combined with unbeaten accuracy, the INCRA Miter 1000 is a terrific choice. We combined a solid-steel laser cut protractor head with a gold anodized...
    MITER100018T
    CAD $219.00
    Add to Cart
  • MITRE GAUGE 1000SE INCRA
    Add to Cart

    Incra

    MITRE GAUGE 1000SE INCRA

    CAD $286.00
    MITER1000SE INCRA MITER GAUGE SPECIAL EDITION The Miter 1000 Special Edition builds on the excellent foundation provided by the Miter 1000. The Incra exclusive AngleLOCK Indexing System delivers 41 lock solid angle stops in 5-degree increments over a...
    MITER1000SE
    CAD $286.00
    Add to Cart
  • MITER GAUGE 1000HD WITH 18IN. TO 30IN.
    Add to Cart

    Incra

    MITER GAUGE TELESCOPING FENCE 18IN. TO 31IN.

    CAD $332.00
    MITER1000HD Miter Gauge 1000 High Definition - INCRA The NEW INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition; because the protractor plate's exclusive AngleLOCK Indexing System has a...
    MITER1000HD
    CAD $332.00
    Add to Cart
  • MITER GAUGE WITH 120 ANGLELOCK STOPS
    Add to Cart

    Incra

    MITER GAUGE WITH 120 ANGLELOCK STOPS

    CAD $156.99
    Miter Gauge V120 - INCRA The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two...
    MITERV120
    CAD $156.99
    Add to Cart
  • MITER EXPRESS INCRA
    Add to Cart

    Incra

    MITER EXPRESS INCRA

    CAD $259.00
    MITEREXPRESS INCRA MITER GAUGE EXPRESS The NEW Incra Miter Express Makes Safe and Easy Mitered Cuts Incra's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Turn any miter...
    MITEREXPRESS
    CAD $259.00
    Add to Cart
  • BLADE 10 X 24 X 5/8 FLAT TOP FREUD
    Add to Cart

    Freud

    BLADE 10 X 24 X 5/8 FLAT TOP FREUD

    CAD $64.99
    "Freud" Industrial Thin Kerf Rip Blades With the thin kerf design this blade does not require much power which is great for those under powered table and radial arm saws. Arbor: 5/8" Bore Size: 10" x 24 ATB Teeth Perma-shield coated to reduce friction...
    LU87R010
    CAD $64.99
    Add to Cart
  • BLADE 10 X 60 X 5/8IN. TCG FREUD
    Add to Cart

    Freud

    BLADE 10 X 60 X 5/8IN. TCG FREUD

    CAD $119.00
    LU82M010 10" 60-Teeth Multi-Purpose Saw Blade - FREUD An ideal saw blade for precise crosscuts in softwood, hardwood, fine moldings, and picture frame molding Thick MicroGrain carbide tips allow for more cuts between sharpening Laser-cut anti-vibration...
    LU82M010
    CAD $119.00
    Add to Cart
  • SWING STOP KREG
    Add to Cart

    Kreg

    SWING STOP KREG

    CAD $59.99
    KREG FLIP STOP Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.
    KMS7801
    CAD $59.99
    Add to Cart
  • BAND SAW FENCE PRECISION KREG
    Add to Cart

    Kreg

    BAND SAW FENCE PRECISION KREG

    CAD $193.00
    KREG PRECISION BAND SAW FENCE The KREG fence is designed to produce an unprecedented level of rigidity, adjustability, and precision. The fence is adjustable in two dimensions for ease in setting it parallel to the blade. Cutting accuracy and...
    KMS7200
    CAD $193.00
    Add to Cart
  • MOBILE BASE ADJ.C/IRON WHEELS CAP 1300LB
    Add to Cart

    Shop Fox

    SHOP FOX MOBILE BASE 1300LB CAP D2058A

    CAD $179.00
    D2058A Super Heavy Duty Mobile Base with 1300 lbs Capacity - ShopFox 18" x 24" to 28-1/2" x 33-1/2" The new & improved version of the classic Heavy Duty Shop Fox Mobile Base features overall better construction, new cast iron wheels and infinite...
    D2058A
    CAD $179.00
    Add to Cart
  • MOBILE BASE ADJ 18.5X20 29X29 CAP 700LB
    Add to Cart

    Shop Fox

    SHOP FOX MOBILE BASE 1000LB CAP D2057A

    CAD $169.00
    D2057A Adjustable Mobile Base with 1000 lbs Capacity- ShopFox Adjustable from 20" x 20" to 29-1/2" x 29-1/2" New & improved version of the popular Shop Fox mobile bases features better overall construction & design. Used for a stable and...
    D2057A
    CAD $169.00
    Add to Cart
  • EMERY CLOTH ROLL 100 GRIT
    Pre-Order Now

    Woodstock

    EMERY CLOTH ROLL 100 GRIT

    CAD $9.99
    Emery Cloth Roll 100 Grit A popular abrasive among woodworkers, tradesmen and hobbyists in the workshop, this emery cloth roll is water resistant and ideal for fine finishes. More flexible and durable then regular sandpaper, this works great on metals...
    D1125
    CAD $9.99
    Pre-Order Now
  • EMERY CLOTH ROLL 180 GRIT
    Add to Cart

    Woodstock

    EMERY CLOTH ROLL 180 GRIT

    CAD $9.99
    Emery Cloth Roll 180 Grit A popular abrasive among woodworkers, tradesmen and hobbyists in the workshop, this emery cloth roll is water resistant and ideal for fine finishes. More flexible and durable then regular sandpaper, this works great on metals...
    D1124
    CAD $9.99
    Add to Cart
  • BLADE PLANER 3PC/SET DEWALT
    Add to Cart

    DeWalt

    BLADE PLANER 3PC/SET DEWALT

    CAD $99.00
    Blades Replacement blades for the DW735 – DeWalt 13” planer. Knives have locator holes to help align knives on cutter head when changing knives.
    DW7352
    CAD $99.00
    Add to Cart
  • STAND MOBILE FOR DW735 PLANER
    Add to Cart

    DeWalt

    STAND MOBILE FOR DW735 PLANER

    CAD $279.00
    "DeWalt" Mobile Stand for DW735 Maximum versatility Stable under heavy load Includes mobile base, stand, hardware M.D.F. top and shelf
    DW7350
    CAD $279.00
    Add to Cart
  • PLANER 13IN. DUAL SPEED DEWALT
    Add to Cart

    DeWalt

    PLANER 13IN. DUAL SPEED DEWALT

    Now: CAD $649.00
    Was: $899.00
    LIMITED TIME OFFER - SAVE $227 - Use coupon code DW735 at checkout.  DW735 13" Planer Dual Speed - DEWALT  This planer has all the features and power you could ask for in a portable unit. Heavy duty ovreall construction with a with a...
    DW735
    Now: CAD $649.00
    Was: $899.00
    Add to Cart
  • BLADES PLANER 3PC/SET
    Pre-Order Now

    DeWalt

    BLADES PLANER 3PC/SET DEWALT

    CAD $99.00
    Planer blades for 12 1/2" DeWalt DW734 3pc/set Blades are designed of laminated M2 tool steel. Knives have machined locator pins to make alignment easy.
    DW7342
    CAD $99.00
    Pre-Order Now
  • JIG SAW 5.5A 0 3 100SPM 4 POS.
    Add to Cart

    DeWalt

    JIG SAW 5.5A 0 3 100SPM 4 POS.

    CAD $119.00
    DeWalt Jig Saw Keyless blade clamp for fast, easy blade installation and removal 5.5 Amp motor deliver powerful cuts in the hardest materials Variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed 4-position orbital action allows...
    DW317
    CAD $119.00
    Add to Cart
  • DRILL DRIVE
    Add to Cart

    DeWalt

    DEWALT DRILL DRIVE ACCESSORY SYSTEM

    CAD $29.99
    8pc Drill Drive Set Contains Drill Drive holder Drill Drive connector #6, #8, Drill bits with countersinks #8 Replacement drill bit 3 Screwdriver bit tips 1 Square bit tip Heavy-duty container
    DW2730
    CAD $29.99
    Add to Cart
  • TRACK SAW KIT WITH S AND L RAIL DEWALT
    Pre-Order Now

    DeWalt

    TRACK SAW KIT WITH S AND L RAIL DEWALT

    CAD $949.00
    DWS520CK 6-1/2" Corded Track Saw - DeWalt This 6-1/2" Corded Track Saw Kit with 59" and 102" Track provides user, the table saw power and precision, the panel saw rip capacity and the portability needed for the job site. Features Include...
    DWS520CK
    CAD $949.00
    Pre-Order Now
  • SPIRAL CUTTER HEAD REPLACEMENT KIT 10PC
    Add to Cart

    SPIRAL HEAD INSERT REPLACEMENT KIT 10PC CT200KIT

    CAD $99.99
    10pc Spiral Cutterhead Insert Replacement Kit Imported from Germany, these 4 sided carbide insert cutters are for use with models CT200, CT201, CT202, CT203, CT204.   IMPORTANT CT200KIT will fit all machines listed below in the chart...
    CT200KIT
    CAD $99.99
    Add to Cart
  • SANDING PAPER ROLL 150G 3IN. X93IN.
    Add to Cart

    Primex Abrasives

    SANDING PAPER ROLL 150G 3IN. X93IN.

    CAD $20.99
    CT125150 3" x 93" Sanding Paper Roll This aluminum oxide sanding paper roll is 3" wide and 93" long and features 150grit.
    CT125150
    CAD $20.99
    Add to Cart
  • SANDING PAPER ROLL 100G 3IN. X93IN.
    Add to Cart

    Primex Abrasives

    SANDING PAPER ROLL 100G 3IN. X93IN.

    CAD $20.99
    CT125100 3" x 93" Sanding Paper Roll This aluminum oxide sanding paper roll is 3" wide and 93" long and features 100grit.
    CT125100
    CAD $20.99
    Add to Cart
  • BELT/EDGE SANDER 4IN. CRAFTEX CT094
    Add to Cart

    Craftex

    BELT/EDGE SANDER 4IN. CRAFTEX CT094

    Now: CAD $302.86
    Was: $479.00
    4" Bench Top Edge Sander A direct drive motor gives power to a 4" belt sander, which may be used vertically as an edge sander or flat as a standard belt sander. An auxiliary table allows the end of the belt to be used as a contour sander. A 2.5" dust...
    Clearance
    CT094
    Now: CAD $302.86
    Was: $479.00
    Add to Cart
  • JOINTER BLADES 8IN. X 3/4IN. X 1/8IN. 3PCS SET
    Pre-Order Now

    Craftex

    JOINTER BLADES 8IN. X 3/4IN. X 1/8IN. 3PCS SET CT088008

    CAD $69.99
    Jointer Blades for 8" Jointers - 3pc. Set These blades fit CT088 & Delta model 37365X For other jointer, check your original blade size. These popular blades represent good value for the money and are of good quality Size - 8" X 3/4" X 1/8" HSS.
    CT088008
    CAD $69.99
    Pre-Order Now
  • JOINTER 6IN. 1HP W/OPEN STAND CSA CRAFTEX
    Add to Cart

    Craftex

    JOINTER 6IN. 1HP W/OPEN STAND CSA CRAFTEX CT086

    Now: CAD $799.00
    Was: $899.00
    CT086 6" Jointer - CRAFTEX Ideal for small shops and the home hobbyist, this machine provides plenty of power for a 6" jointer and features jackscrew knife adjustment, open style stand and a 46-1/4" precision ground cast iron table. Features Motor:...
    CT086
    Now: CAD $799.00
    Was: $899.00
    Add to Cart
  • TENONING JIG CRAFTEX
    Add to Cart

    Craftex

    TENONING JIG CRAFTEX

    CAD $169.00
    Super Tenon Jig All cast iron to fit any 3/4" table slot with adjusters for fit Screw clamping to 5" clamping plate with adjustment to 20 degree from vertical 45 degree fence to allow compound angles Micro adjustment Two handles for control Designed to...
    CT084
    CAD $169.00
    Add to Cart
  • LATHE WOOD 14IN. X 40IN. 4SPD 1/2HP CRAFTEX CT083
    Pre-Order Now

    Craftex

    LATHE WOOD 14IN. X 40IN. 4SPD 1/2HP CRAFTEX CT083

    Now: CAD $349.00
    Was: $379.00
    14" x 40" Wood Turning Lathe, 1/2 HP An Excellent Lathe For Beginners Square Steel Tubular Ways A complete basic wood lathe, pressed steel base with square tubular ways, cast iron headstock, tailstock and tool rest. Features Motor: 1/2 HP, 110V, 1...
    CT083
    Now: CAD $349.00
    Was: $379.00
    Pre-Order Now
  • BLADE 12IN. X 100T ATB CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 12IN. X 100T ATB CRAFTEX

    CAD $34.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 12" Teeth: 100 ATB (Alternate Top Bevel Grind) Arbor: 1" Application: Finishing
    CT072
    CAD $34.99
    Pre-Order Now
  • BLADE 12IN. X 60T COMBINATION CRAFTEX
    Add to Cart

    Craftex

    BLADE 12IN. X 60T COMBINATION CRAFTEX

    CAD $29.99
    BULK DISCOUNT: Buy 2 + for only $19.99/each. Promotion ends March 16th, 2024 Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 12" Teeth: 60 COMB (Combination Grind) Arbor: 1" Application:...
    CT071
    CAD $29.99
    Add to Cart
  • BLADE 12IN. X 40T ATB CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 12IN. X 40T ATB CRAFTEX

    CAD $24.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 12" Teeth: 40 ATB (Alternate Top Bevel Grind) Arbor: 1" Application: General Purpose
    CT070
    CAD $24.99
    Pre-Order Now
  • BLADE 10IN. X 100T TCG CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 10IN. X 100T TCG CRAFTEX

    CAD $31.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 100 TCG (Triple Chip Grind) Arbor: 5/8" Application: Finishing
    CT069
    CAD $31.99
    Pre-Order Now
  • BLADE 10IN. X 80T ATB CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 10IN. X 80T ATB CRAFTEX

    CAD $30.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 80 ATB (Alternate Top Bevel Grind) Arbor: 5/8" Application: Finish
    CT068
    CAD $30.99
    Pre-Order Now
  • BLADE 10IN. X 80T FLAT TOP CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 10IN. X 80T FLAT TOP CRAFTEX

    CAD $33.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 80 FLAT (Flat Top Grind) Arbor: 5/8" Application: Finish
    CT066
    CAD $33.99
    Pre-Order Now
  • BLADE 10IN. X 60T TCG CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 10IN. X 60T TCG CRAFTEX

    CAD $25.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 60 TCG (Triple Chip Grind) Arbor: 5/8" Application: Finish
    CT065
    CAD $25.99
    Pre-Order Now
  • BLADE 10IN. X 60T COMBINATION CRAFTEX
    Pre-Order Now

    Craftex

    BLADE 10IN. X 60T COMBINATION CRAFTEX

    CAD $26.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 60 COMB (Combination Grind) Arbor: 5/8" Application: Combination
    CT064
    CAD $26.99
    Pre-Order Now
  • BLADE 10IN. X 40T ATB CRAFTEX
    Add to Cart

    Craftex

    BLADE 10IN. X 40T ATB CRAFTEX

    CAD $21.99
    BULK DISCOUNT: Buy 2+ for only $13.99/each. Promotion ends March 16th, 2024 Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 40 ATB (Alternate Top Bevel Grind) Arbor: 5/8"...
    CT063
    CAD $21.99
    Add to Cart
  • BLADE 10IN. X 36T ATB CRAFTEX
    Add to Cart

    Craftex

    BLADE 10IN. X 36T ATB CRAFTEX

    CAD $22.99
    Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 10" Teeth: 36 ATB (Alternate Top Bevel Grind) Arbor: 5/8" Application: Rip
    CT062
    CAD $22.99
    Add to Cart
  • BLADE 8IN. X 40T ATB CRAFTEX
    Add to Cart

    Craftex

    BLADE 8IN. X 40T ATB CRAFTEX

    CAD $14.99
    BULK DISCOUNT: Buy 2 + for only $8.99/each. Promotion ends March 16th, 2024 Carbide Tipped Table Saw Blades Tungsten Carbide Tipped, Thin Kerf (Power Saving) Anti-Kick Back Design. Diameter: 8" Teeth: 40 ATB (Alternate Top Bevel Grind) Arbor: 5/8"...
    CT061
    CAD $14.99
    Add to Cart
  • BLADE 97 1/4IN. X1/4IN. X.025X6TPI LOW TENSION
    Add to Cart

    R and D Bandsaws

    BLADE 97 1/4IN. X1/4IN. X.025X6TPI LOW TENSION

    CAD $52.99
    Band Saw Blade for Model CT015 14 1/2" Band Saw Precision Low Tension "Tuff Tooth" Swedish Silicon Steel 5 tooth set pattern Milled teeth 2 to 3 times longer life Weld guarantee Fast cutting and straight smooth cuts even on thick wood. Long life because...
    CT015014LT
    CAD $52.99
    Add to Cart
  • BLADE 97.25IN. X1/2IN. X.025X3TPI LOW TENSION
    Add to Cart

    R and D Bandsaws

    BLADE 97.25IN. X1/2IN. X.025X3TPI LOW TENSION

    CAD $52.99
    Band Saw Blade for Model CT015 14 1/2" Band Saw Precision Low Tension "Tuff Tooth" Swedish Silicon Steel 5 tooth set pattern Milled teeth 2 to 3 times longer life Weld guarantee Fast cutting and straight smooth cuts even on thick wood. Long life ...
    CT015012LT
    CAD $52.99
    Add to Cart
  • BLADE 7 1/4IN. X48T METAL CUTTING CRAF/BT
    Add to Cart

    Craftex Blue Tornado

    BLADE 7 1/4IN. X48T METAL CUTTING CRAF/BT

    CAD $46.99
    CBT012 7-1/4" x 48T Metal Cutting Blade - Craftex Blue Tornado This 7 1/4"high quality Craftex Blue Tornado blade is designed to cut through ferrous metals such as steel, iron, and aluminum. Smooth cuts with minimal friction drag means clean cuts and...
    CBT012
    CAD $46.99
    Add to Cart
  • BLADE 14IN. X80T METAL CUTTING CRAFTEX/BT
    Pre-Order Now

    Craftex Blue Tornado

    BLADE 14IN. X80T METAL CUTTING CRAFTEX/BT

    CAD $154.99
    14" x 80T Metal Cutting Saw Blade - Craftex Blue Tornado This14" high quality Craftex Blue Tornado blade is designed to cut through ferrous metals such as steel, iron, and aluminum. Smooth cuts with minimal friction drag means clean cuts and time saved...
    CBT011
    CAD $154.99
    Pre-Order Now
  • BLADE 10IN. X 80T TCG MINUS 10 DEGREE HOOK
    Add to Cart

    Craftex Blue Tornado

    BLADE 10IN. X 80T TCG MINUS 10 DEGREE HOOK

    CAD $100.99
    10" x 80T Laminate Saw Blade - Craftex Blue Tornado This high quality Craftex Blue Tornado blade is designed to cut laminates, veneers & melamine with precision and accuracy. The negative hook angle eliminates chipping and produces an excellent...
    CBT009
    CAD $100.99
    Add to Cart
  • BLADE 10IN. X50T COMBI 5/8IN. CRAFTEXB/TORNADO
    Add to Cart

    Craftex Blue Tornado

    BLADE 10IN. X50T COMBI 5/8IN. CRAFTEXB/TORNADO

    CAD $73.99
    Rip & Cross Cut Table Saw Blade 10" x 50T - Craftex Blue Tornado This high quality premium TCT saw blade features extra thick C4 tungsten carbide and is computer balanced to reduce vibration and increase accuracy. The laser cut anti vibration...
    CBT007
    CAD $73.99
    Add to Cart
  • BLADE 10IN. X80T ATB 5/8IN. CRAFTEX B/TORNADO
    Add to Cart

    Craftex Blue Tornado

    BLADE 10IN. X80T ATB 5/8IN. CRAFTEX B/TORNADO

    CAD $90.99
    Laminate & Fine Cut Table Saw Blade 10" x 80T - Craftex Blue Tornado This high quality premium TCT saw blade features extra thick C4 tungsten carbide and is computer balanced to reduce vibration and increase accuracy. The laser cut anti vibration...
    CBT003
    CAD $90.99
    Add to Cart
  • TABLE VISE 2IN.
    Add to Cart

    Groz

    TABLE VISE 2IN.

    CAD $19.99
    "Clamp On" Machine Vise 2" Groz The body of this 2" vise is made from high grade cast iron, and the clamp is provided for a firm grip. The handle and bar are chrome plated.
    B9862
    CAD $19.99
    Add to Cart
  • WOOD VISE CARPENTERFT S 9IN.
    Add to Cart

    Groz

    WOOD VISE CARPENTERFT S 9IN.

    CAD $81.99
    9" Woodworking Vise Features Mounts flush with top of your bench Heavy-duty close grain cast iron construction Top quality workmanship for smooth action and long life Handles and spindles are chrome-plated Vise nut made of malleable cast iron...
    B923
    CAD $81.99
    Add to Cart
  • DOVETAIL KIT INCL 105127 B2421IN B2422
    Add to Cart

    DOVETAIL KIT INCL 1051272 B2421IN B2422

    CAD $27.99
    Dovetail Jig Kit For Dovetail Jig Model #'s CT052, CT154 & B755. This dovetail jig kit fits perfectly with your dovetail jig and will get you making beautiful dovetail jigs in no time. Contains: 1 - Dovetail Router Bit 1/2"D x 14 deg x 1/4" shank,...
    B755KIT
    CAD $27.99
    Add to Cart
  • PARALLEL BAR SET 3/16IN.
    Add to Cart

    PARALLEL BAR SET 3/16IN.

    CAD $73.99
    PRECISION PARALLEL BAR SET Ideal for layout work and setups Matched pairs are hardened and ground Set of 4 pairs come in widths of 1.000",1.250", 1.500" and 1.750". Size 3/16" x 6"
    B727316
    CAD $73.99
    Add to Cart
  • DISC SANDING 12IN. 80 GRIT
    Add to Cart

    Primex Abrasives

    DISC SANDING 12IN. 80 GRIT

    Now: CAD $9.99
    Was: $10.99
    80-Grit Aluminum Oxide Abrasive Disc 12" Sanding Replacement Disc for the B023N & B2193 Grit: 80 Diameter: 12"
    B71280
    Now: CAD $9.99
    Was: $10.99
    Add to Cart
  • DISC SANDING 12IN. 60 GRIT
    Add to Cart

    Primex Abrasives

    DISC SANDING 12IN. 60 GRIT

    Now: CAD $9.99
    Was: $10.99
    60-Grit Aluminum Oxide Abrasive Disc 12" Sanding Replacement Disc for the B023N & B2193 Grit: 60 Diameter: 12"
    B71260
    Now: CAD $9.99
    Was: $10.99
    Add to Cart
  • DISC SANDING 12IN. 150 GRIT
    Add to Cart

    Primex Abrasives

    DISC SANDING 12IN. 150 GRIT

    Now: CAD $9.99
    Was: $10.99
    150-Grit Aluminum Oxide Abrasive Disc 12" Sanding Replacement Disc for the B023N & B2193 Grit: 150 Diameter: 12"
    B712150
    Now: CAD $9.99
    Was: $10.99
    Add to Cart
  • DISC SANDING 12IN. 120 GRIT
    Add to Cart

    Primex Abrasives

    DISC SANDING 12IN. 120 GRIT

    Now: CAD $9.99
    Was: $10.99
    120-Grit Aluminum Oxide Abrasive Disc 12" Sanding Replacement Disc for the B023N & B2193 Grit: 120 Diameter: 12"
    B712120
    Now: CAD $9.99
    Was: $10.99
    Add to Cart
  • DISC SANDING 12IN. 100 GRIT
    Add to Cart

    Primex Abrasives

    DISC SANDING 12IN. 100 GRIT

    Now: CAD $9.99
    Was: $10.99
    100-Grit Aluminum Oxide Abrasive Disc 12" Sanding Replacement Disc for the B023N & B2193 Grit: 100 Diameter: 12"
    B712100
    Now: CAD $9.99
    Was: $10.99
    Add to Cart
  • 1 2 3 BLOCK
    Add to Cart

    1 2 3 BLOCK

    Now: CAD $24.99
    Was: $29.99
    A 1-2-3 block is a layout tool that can be used for both metal and woodworking. As the name suggests, the block's thickness is 1", the width is 2", and the length is 3". A quick and accurate reference to those sizes in a convenient package for all sorts...
    B653
    Now: CAD $24.99
    Was: $29.99
    Add to Cart

Busy Bee Tools has the woodworking machines and tools that every serious woodworker is after. With a wide selection of band saws, table saws, planers, jointers, sanders, shapers, router tables, wood lathes and more, you can count on Busy Bee Tools for your woodworking needs. Our two in house brands, Craftex and Craftex CX-Series feature two and three year warranties respectively and these in house brands are bought and sold directly to the end user, avoiding middleman markups and saving you money. For the serious woodworker, Busy Bee Tools is the number one choice.

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley