null

Woodworking

Woodworking

  • OVERARM BLADE GUARD SYSTEM CX SERIES
    Add to Cart

    Craftex CX Series

    OVERARM BLADE GUARD SYSTEM CX SERIES CXARM

    Now: CAD $599.00
    Was: $649.00
    CXARM  Over Arm Blade Guard System Craftex CX-Series Add safety and dust collection to your table saw with this Over Arm Blade Guard.  This floor standing unit will fit just about any table saw and comes with an extra support bracket that...
    CXARM
    Now: CAD $599.00
    Was: $649.00
    Add to Cart
  • PAINTERS FINISHING POINTS
    Add to Cart

    PAINTERS FINISHING POINTS

    CAD $7.99
    Introducing Mini Finishing Points, the cost-effective and efficient solution for achieving a smooth and even finish on multiple pieces at once. These small finishing points lift your project off the bench, allowing the bottom side to dry while you work...
    B4228
    CAD $7.99
    Add to Cart
  • PARALLEL BAR SET 3/16IN.
    Add to Cart

    PARALLEL BAR SET 3/16IN.

    CAD $73.99
    PRECISION PARALLEL BAR SET Ideal for layout work and setups Matched pairs are hardened and ground Set of 4 pairs come in widths of 1.000",1.250", 1.500" and 1.750". Size 3/16" x 6"
    B727316
    CAD $73.99
    Add to Cart
  • PARALLEL CLAMPS 2IN.
    Add to Cart

    Groz

    PARALLEL CLAMPS 2IN.

    CAD $8.99
    Tool Makers Parallel Clamp - Groz Excellent for layout and set up Made of hardened tool steel Includes spring clip and a retain ring Opening: 1 1/4" Jaw length: 2"
    B613
    CAD $8.99
    Add to Cart
  • PARTING TOOL 2MM FLUTED SORBY
    Pre-Order Now

    Robert Sorby

    PARTING TOOL 2MM FLUTED SORBY

    CAD $99.99
    2 mm Parting Tool Fluted 18" long Used with flute downwards. This tool gives an exceptionally good finish even when parting through end grain. Sides taper ground for clearance. High Speed Steel
    832H2M
    CAD $99.99
    Pre-Order Now
  • PIN VISE CAPACITY 0.030 0.062
    Add to Cart

    PIN VISE CAPACITY 0.030 0.062

    CAD $4.99
    B3100 Pin Vise This pin vise features hardened and tempered jaws with knurled handle and holds small delicate tools, parts, screws, wires and spindles. Capacity: 0.030 0.062
    B3100
    CAD $4.99
    Add to Cart
  • PIN VISE SET
    Add to Cart

    Groz

    PIN VISE SET

    CAD $9.99
    Pin Vise Set Pin vise holds small delicate tools, parts, screws, wires and spindles Jaws are hardened and tempered Handle knurled for easy grip Set of 4pcs in a fitted case Capacity: 0-.040, .050-.125, .030-.062, .115-.187
    B599
    CAD $9.99
    Add to Cart
  • PLANE SHOULDER 5 3/16IN.
    Add to Cart

    PLANE SHOULDER 5 3/16IN.

    CAD $85.00
    B3111 5-3/16" Shoulder Plane This shoulder plane features 5-3/16" long sole and a 3/4" wide sharp steel blade ensuring perfectly smooth surface. The adjustable throat opening is for very fine or coarse work and the top part can be removed for changing...
    B3111
    CAD $85.00
    Add to Cart
  • PLANER 13IN. DUAL SPEED DEWALT
    Add to Cart

    DeWalt

    PLANER 13IN. DUAL SPEED DEWALT

    Now: CAD $649.00
    Was: $899.00
    LIMITED TIME OFFER - SAVE $227 - Use coupon code DW735 at checkout.  DW735 13" Planer Dual Speed - DEWALT  This planer has all the features and power you could ask for in a portable unit. Heavy duty ovreall construction with a with a...
    DW735
    Now: CAD $649.00
    Was: $899.00
    Add to Cart
  • PLANER 13IN. WITH FOLDING TABLE AND BLADE
    Add to Cart

    DeWalt

    PLANER 13IN. WITH FOLDING TABLE AND BLADE

    Now: CAD $799.00
    Was: $949.00
    DW735XCAN  13" Dual Speed Planer with Infeed & Outfeed Tables and Three Extra Knives - DEWALT Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease Three knife cutter-head...
    DW735XCAN
    Now: CAD $799.00
    Was: $949.00
    Add to Cart
  • PLANER 13IN. WITH MOBILE STAND DEWALT
    Add to Cart

    DeWalt

    PLANER 13IN. WITH MOBILE STAND DEWALT

    CAD $999.00
    13" Planer Dual Speed with Stand The World's best selling portable planer has all the features and power you could ask for in a portable unit. Made in Taiwan, this is hands down the best portable planer on the market today. Features: Powerful 15MP,...
    DW735S
    CAD $999.00
    Add to Cart
  • PLANER 15IN. 3HP 3 KNIVE CUTTERHEAD CSA CX15
    Add to Cart

    Craftex CX Series

    PLANER 15IN. 3HP 3 KNIVE CUTTERHEAD CSA CX15

    Now: CAD $2,199.00
    Was: $2,499.00
    CX15 15" and 20" Heavy Duty Planers Craftex CX... by busybeetools 15” Planer – Craftex CX-Series This heavy duty planer was built with all day production in mind and has all the features any serious woodworker would look for in a...
    CX15
    Now: CAD $2,199.00
    Was: $2,499.00
    Add to Cart
  • PLANER 20IN. 5HP 4 KNIVE CUTTERHEAD CSA
    Add to Cart

    Craftex CX Series

    PLANER 20IN. 5HP 4 KNIVE CUTTERHEAD CSA CX20

    Now: CAD $3,449.00
    Was: $3,699.00
    CX20 15" and 20" Heavy Duty Planers Craftex CX... by busybeetools 20" Planer - Craftex CX-Series This planer will tackle just about any project you throw at it, all day, everyday. Features on this unit include a powerful 5HP motor, precision ground...
    CX20
    Now: CAD $3,449.00
    Was: $3,699.00
    Add to Cart
  • PLANER BLADES 15IN. 3 PC SET
    Pre-Order Now

    PLANER BLADES 15IN. 3 PC SET

    CAD $115.00
    Planer blades for 15" planers Fits Craftex Models CT055, B350 & Delta Model 22790X For other brands or models of planers, check your original blade size. These popular blades represent good value for the money and good quality. Size - 15" x 1" x...
    B350015
    CAD $115.00
    Pre-Order Now
  • POCKET MARKING RULER
    Add to Cart

    DASQUA

    POCKET MARKING RULER

    CAD $21.99
    Introducing our Pocket Marking Ruler, a compact and reliable tool designed for precise marking in various applications. Crafted from high-quality, durable, and rust-resistant aluminum alloy, this ruler ensures long-lasting performance. It is the perfect...
    B4207
    CAD $21.99
    Add to Cart
  • POCKET MARKING T RULER
    Add to Cart

    DASQUA

    POCKET MARKING T RULER

    CAD $21.99
    Introducing our Pocket Marking T-Ruler, a compact and versatile tool designed to enhance precision in your marking tasks. Crafted from high-quality, durable, and rust-resistant aluminum alloy, this ruler ensures long-lasting performance. It is the ideal...
    B4208
    CAD $21.99
    Add to Cart
  • PORTABLE VERTICAL PANEL SAW SAFETY SPEED (B4309)

    PORTABLE VERTICAL PANEL SAW SAFETY SPEED

    Now: CAD $2,399.00
    Was: $2,599.00
    B4309 SAFETY SPEED PORTABLE VERTICAL PANEL SAW The Safety Speed Portable Vertical Panel Saw is a compact panel saw with a 5’ frame, and a 50” maximum crosscut with a 96” rip cut capacity. Featuring a cut accuracy of 1/32″,...
    B4309
    Now: CAD $2,399.00
    Was: $2,599.00
  • POWER FEEDER 1/4HP 4 SPEEDS CRAFTEX CSA
    Pre-Order Now

    Craftex CX Series

    POWER FEEDER 1/4HP 4 SPEEDS CRAFTEX CSA CXP02

    Now: CAD $1,149.00
    Was: $1,299.00
    CXP02 1/4-HP Four Speed Power Feeder – Craftex CX-Series The CXP02 features a 1/4-HP, 110-Volt motor and three synthetic rubber feed rollers that eliminate the chore of feeding stock by hand and increases shop production. This power feeder has four...
    CXP02
    Now: CAD $1,149.00
    Was: $1,299.00
    Pre-Order Now
  • POWER FEEDER 1/8HP VARIABLE SPEED CSA CXP01
    Pre-Order Now

    Craftex CX Series

    POWER FEEDER 1/8HP VARIABLE SPEED CSA CXP01

    Now: CAD $749.00
    Was: $799.00
    CXP01 1/8-HP Variable Speed Power Feeder – Craftex CX-Series Increase your shop production with this Variable Speed Power Feeder. The CXP01 is designed with a 1/8-HP, 110-Volt motor providing a feed rate of 6-1/2 to 39 feet per minute for...
    CXP01
    Now: CAD $749.00
    Was: $799.00
    Pre-Order Now
  • POWER FEEDER FOR MILLING MACHINES
    Add to Cart

    POWER FEEDER FOR MILLING MACHINES AL500PX

    CAD $679.00
    AL500PX Power Feeder for Milling Machine - ALIGNFor 2V, 3V and 5V milling machine of table feedHighest quality design and construction material.Strengthened "ZYLTEL GEAR"Safe design operation stable low noise.Long life span designed...
    AL500PX
    CAD $679.00
    Add to Cart
  • PRECISION 3 WAY DRILL PRESS VISE 4IN.

    PRECISION 3 WAY DRILL PRESS VISE 4IN.

    Now: CAD $89.00
    Was: $95.00
    B3318 Precision 3 Way Drill Vise Uni-Grip Manufactured from graded cast iron. This vise has side faces which are fully ground allowing right angle positioning in 3 directions horizontal, vertical and straight. The most versatile vise made for a pillar...
    B3318
    Now: CAD $89.00
    Was: $95.00
  • PRECISION 3 WAY DRILL PRESS VISE 5IN.
    Add to Cart

    PRECISION 3 WAY DRILL PRESS VISE 5IN.

    Now: CAD $109.00
    Was: $119.00
    B3319 5" Precision 3 Way Drill Press Vise Graded cast iron construction Prismatic fixed jaw for holding round material Stepped jaws for holding thin material Precision ground right angle faces for horizontal and vertical positioning Can be mounted...
    B3319
    Now: CAD $109.00
    Was: $119.00
    Add to Cart
  • PRECISION ADJUSTABLE UNIVERSAL DOWEL JIG
    Add to Cart

    DASQUA

    PRECISION ADJUSTABLE UNIVERSAL DOWEL JIG

    Now: CAD $39.99
    Was: $49.99
    Introducing our Adjustable Universal Dowel Jig, a versatile tool designed to simplify drilling tasks and achieve precise hole depths. This dowel jig offers easy adjustment of drilling height and hole depth, allowing for customization based on your...
    B4216
    Now: CAD $39.99
    Was: $49.99
    Add to Cart
  • PRECISION BAND SAW FENCE CX SERIES CXBSFENCE
    Add to Cart

    Craftex CX Series

    PRECISION BAND SAW FENCE CX SERIES CXBSFENCE

    Now: CAD $133.22
    Was: $279.00
    CXBSFENCE PRECISION BAND SAW FENCE CX SERIES This is a great rip fence upgrade for anyone looking to replace there worn or sub-standard band saw fence to improve accuracy on an otherwise well performing machine. It is constructed from aluminum...
    Clearance
    CXBSFENCE
    Now: CAD $133.22
    Was: $279.00
    Add to Cart
  • PRECISION LAYOUT AND MARKING SET
    Add to Cart

    DASQUA

    PRECISION LAYOUT AND MARKING SET

    CAD $69.99
    This 5 pc Precision Layout and Marking set is CNC machined with a precision ground measuring face for high accuracy and repeatability. The laser engraved scale with black lines against the sand blasted finish allow for easy reading. All gauges a...
    B4141
    CAD $69.99
    Add to Cart
  • PRECISION MARKING RULE 12IN. INCRA
    Add to Cart

    Incra

    PRECISION MARKING RULE 12IN. INCRA

    CAD $20.99
    INCRA PRECISION MARKING RULE 12" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE12
    CAD $20.99
    Add to Cart
  • PRECISION MARKING RULE 6IN. INCRA
    Add to Cart

    Incra

    PRECISION MARKING RULE 6IN. INCRA

    CAD $10.99
    INCRA PRECISION MARKING RULE 6" Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. Micro-fine guide holes and slots at every 1/16"and 1/32" scale position instantly locate your sharp pencil...
    RULE06
    CAD $10.99
    Add to Cart
  • PREMIUM MORITISING CHISEL 1/2IN. CX SERIES
    Pre-Order Now

    Craftex CX Series

    PREMIUM MORITISING CHISEL 1/2IN. CX SERIES

    CAD $29.99
    CX305M12 1/2" Premium Mortising Chisel - Craftex CX-Series These high quality Japanese Chisels are a big upgrade from any mortising chisels previously carried at Busy Bee Tools. Designed for superior chip extraction and ejection, each chisel and bits...
    CX305M12
    CAD $29.99
    Pre-Order Now
  • PREMIUM MORTISE MARKING GAUGE
    Add to Cart

    PREMIUM MORTISE MARKING GAUGE

    CAD $39.99
      This Mortising Gauge is crafted from solid ebony and brass marking this gauge a great value. When it comes time to cut those mortises and the fine lines laid out by this gauge will guarantee precise results. One side of the beam has two pins for...
    B3813
    CAD $39.99
    Add to Cart
  • PRICK PUNCH 3/8IN.
    Add to Cart

    Groz

    PRICK PUNCH 3/8IN.

    CAD $11.99
    PKPHD 3/8" Prick Punch - GROZ Prick Punches are used for marking metals in work layouts. This punch has a very sharp point (60° included angle), hence is highly suitable where very precise marking / scorring is required. It has a single piece...
    PKPHD
    CAD $11.99
    Add to Cart
  • PRO STIK ABRASIVE CLEANER 1 3/8IN. SQ. X 4
    Add to Cart

    Woodstock

    PRO STIK ABRASIVE CLEANER 1 3/8IN. SQ. X 4

    CAD $12.99
    Our PRO-STIK cleaners are the easiest solution for unloading abrasives. Increase the life of new sanding belts and discs with our quality PRO-STIK abrasive belt cleaners. Simply press the cleaner lightly against moving sanding belts and discs to remove...
    W1304
    CAD $12.99
    Add to Cart
  • PROTRACTOR MACHINIST M024
    Add to Cart

    PROTRACTOR MACHINIST M024

    CAD $9.99
    B1086 8" Round Protractor Stainless steel protractor provides accurate measurements Easy to read etched numbers Locking arms helps prevents measuring mistakes
    B1086
    CAD $9.99
    Add to Cart
  • PULL SAW 11IN.
    Add to Cart

    ROK

    PULL SAW 11IN.

    CAD $18.99
    This 11” Pull Saw is equipped with heat treated hardened teeth for long lasting sharpness. The three cutting edges on each tooth allow for fast smooth effortless cuts. Pull saw folds in have for safe and convenient storage. Features: Heat treated...
    B4022
    CAD $18.99
    Add to Cart
  • PUSH PAD EXTRA LONG
    Add to Cart

    PUSH PAD EXTRA LONG

    CAD $14.99
    B3104 Extra Long Safety Push Pad Made of strong ABS plastic this push pad is 16" long and 2-3/4" wide and is designed for comfort and control. The push pad has a sticky pad for strong hold. A great safety measure.
    B3104
    CAD $14.99
    Add to Cart
  • PUSH STICKS FT VFT SAFETY 2PC
    Pre-Order Now

    PUSH STICKS FT VFT SAFETY 2PC

    CAD $9.99
    Safety "V'' Push Stick 2pc These smartly designed push sticks are made of impact resistant plastic Can be used effectively for your table saw, jointer, shaper and router table operations
    B1843
    CAD $9.99
    Pre-Order Now
  • QUICK ADJUSTMENT CLAMPS SET OF 2
    Add to Cart

    Laguna

    QUICK ADJUSTMENT CLAMPS SET OF 2

    CAD $89.00
    Quick adjust hold down clamps have a quick release, saving time when clamping and unclamping projects to the CNC table. The robust 5/16” T-bolt slides easily into the extruded table T-slots, and is long enough to capture nearly any material up to...
    I24QUICKCLAM
    CAD $89.00
    Add to Cart
  • RAZOR SAW GYOKUCHO
    Add to Cart

    Razor Saw

    RAZOR SAW GYOKUCHO

    CAD $63.99
    B3728 This Japanese saw is designed as a dovetail/general lumber saw, the Gyokucho tatebiki Noko is fast and smooth. It cuts beautifully under its own weight and is also very easy to keep on-line. The thin (0.3mm) blade removes very little material and...
    B3728
    CAD $63.99
    Add to Cart
  • RAZORSAW 180 RYOBA GYOKUCHO
    Add to Cart

    RAZORSAW 180 RYOBA GYOKUCHO

    CAD $43.99
    B3726 The 7" Razorsaw 180 Ryoba is a Japanese saw with double edge made by Gyokucho has a blade length of 7 and an overall length of 15. The cross cut side has 19tpi, and the rip side has 9 tpi. A unique feature of the Gyokucho Ryoba Saws is the handle...
    B3726
    CAD $43.99
    Add to Cart
  • RAZORSAW 180 USUBA GYOKUCHO
    Add to Cart

    Razor Saw

    RAZORSAW 180 USUBA GYOKUCHO

    CAD $39.99
    B3734 The Razorsaw 180mm Usuba is a new breed of high performance Japanese saw built to the same quality that made the Razorsaw name famous, but compact enough to fit into any toolbox. This Usuba Saw's blade features a curved tip to allow cuts in...
    B3734
    CAD $39.99
    Add to Cart
  • RESPIRATOR DUAL FILTER
    Add to Cart

    ROK

    RESPIRATOR DUAL FILTER

    CAD $16.99
    B3465 Dual Filter Respirator Use dust cartridge for protection from particulates from sanding, grinding and sawing Comes with cartridges for dust Replacement Cartridges: Dust: 70614 Organic vapour: 70615
    B3465
    CAD $16.99
    Add to Cart
  • REVOLUTION MITER GAUGE
    Add to Cart

    SAWSTOP

    REVOLUTION MITER GAUGE

    CAD $599.00
    SAWSTOP Revolution Mitre Gauge Saw Stop’s Revolution Miter Gauge is built around a mitre gauge head with an innovative and intuitive dial adjustment to fine-tune the angle. Settings are precise, reliable, and repeatable. Furthermore, setup and...
    TSARMG
    CAD $599.00
    Add to Cart
  • RIKON 14IN. PROFESSIONAL BANDSAW
    Add to Cart

    Rikon

    RIKON 14IN. PROFESSIONAL BANDSAW

    CAD $3,399.00
    10353 (Available through special order only. Please allow for 2 to 3 weeks for delivery.) 14" Bandsaw (10353) features an impressive 3HP motor and the largest cutting capacity in this model range, which makes this saw ideal for use in re-sawing...
    10353
    CAD $3,399.00
    Add to Cart
  • RIKON 18IN. DELUXE BAND SAW
    Add to Cart

    Rikon

    RIKON 18IN. DELUXE BAND SAW

    CAD $3,399.00
    10342 (Available through special order only. Please allow for 2 to 3 weeks for delivery.) 18" Bandsaw (10342) is an entry level machine to this larger capacity category. Ample 2 HP motor provides plenty of power behind the single 3,200 ft/min blade...
    10342
    CAD $3,399.00
    Add to Cart
  • RIKON 18IN. PROFESSIONAL BAND SAW
    Add to Cart

    Rikon

    RIKON 18IN. PROFESSIONAL BAND SAW

    CAD $4,425.00
    10347 (Available through special order only. Please allow 2 to 3 weeks for delivery.) The 18" Bandsaw (10347) has one of the most powerful motors in the line, 4HP with 19" of re-saw capacity, which makes it ideal for woodworkers doing a lot of heavy...
    10347
    CAD $4,425.00
    Add to Cart
  • RIKON 30IN. X 40IN. VSR LATHE W/SLIDING BED
    Add to Cart

    Rikon

    RIKON 30IN. X 40IN. VSR LATHE W/SLIDING BED

    CAD $5,750.00
    ***SPECIAL ORDER PLEASE ALLOW 3 TO 5 WEEKS FOR DELIVERY*** RIKON's Heavy Duty 70-3040 Variable Speed Lathe features an innovative SLIDING BED that increases your turning capacity with just a turning of a switch! The special motorized upper bed...
    703040
    CAD $5,750.00
    Add to Cart
  • RIKON MOBILITY KIT FOR 10341/10342/10345
    Add to Cart

    Rikon

    RIKON MOBILITY KIT FOR 10341/10342/10345

    CAD $149.99
    Mobility Kit for 10-341, 345, 346, 347, 350, 350BAL, 351, 353, 370 Add the ease and convenience of mobility to your Rikon band saw or machine. This mobility kit allows for you to safely and easily move your equipment around your shop. This type of...
    13345
    CAD $149.99
    Add to Cart
  • ROUTER BIT DEPTH GAUGE
    Add to Cart

    ROUTER BIT DEPTH GAUGE

    CAD $13.99
    Router Bit Depth Gauge You're all set to rout V-groove into a piece of expensive stock. How can you be sure the depth you've set is the depth the router will cut? Simple. Check it with this handy router depth gauge. The guide is clearly marked in 16ths...
    B1309
    CAD $13.99
    Add to Cart
  • SAFE MAG. JAWS 4IN.
    Add to Cart

    SAFE MAG. JAWS 4IN.

    CAD $19.99
    Magnetic Safe Jaws 4" Aluminum angle 1 1/2" x 1 1/2" V-grooved for round stock 1/4" thick Extruded aluminum frame Soft rubber faces Magnets hold safe jaws securely in place
    B16504
    CAD $19.99
    Add to Cart
  • SAFE MAG. JAWS 5IN.
    Pre-Order Now

    SAFE MAG. JAWS 5IN.

    CAD $19.99
    Magnetic Safe Jaws 5" Aluminum angle 1 1/2" x 1 1/2" V-grooved for round stock 1/4" thick Extruded aluminum frame Soft rubber faces Magnets hold safe jaws securely in place
    B16505
    CAD $19.99
    Pre-Order Now
  • SAFETY FACE SHIELD NIH APPROVED
    Add to Cart

    Groz

    SAFETY FACE SHIELD NIH APPROVED

    Now: CAD $6.99
    Was: $9.99
    Professional Protection Reusable Safety Face Shield that covers a large area from the eyebrows to the chin to protect against foreign aggression and full facial protection from droplets, saliva, splash, oil and dust. Constructed with a durable full face...
    B4105
    Now: CAD $6.99
    Was: $9.99
    Add to Cart
  • SAFETY GLASSES CLEAR

    SAFETY GLASSES CLEAR

    Now: CAD $4.99
    Was: $6.99
    Elevate workplace safety without sacrificing comfort with our premium Safety Glasses. These glasses are engineered for optimal protection and wearer satisfaction, making them a must-have for professionals in diverse environments. Features: Lightweight...
    BAKER401C
    Now: CAD $4.99
    Was: $6.99
  • SALAD BOWL FINISH CLAPHAMS 1.75 OZ. (B158902)
    Add to Cart

    Claphams

    SALAD BOWL FINISH CLAPHAMS 1.75 OZ.

    CAD $10.99
    B158902 1.75 Oz Beeswax Salad Bowl Finish - CLAPHAM'S Our food-grade Beeswax/Carnauba/Mineral oil finish is suitable for all things wooden in the kitchen. The finish protects the wood and gives it a soft lustrous shine. It is suitable for salad bowls,...
    B158902
    CAD $10.99
    Add to Cart
  • SALAD BOWL FINISH CLAPHAMS 7 OZ.
    Add to Cart

    Claphams

    SALAD BOWL FINISH CLAPHAMS 7 OZ.

    CAD $24.99
    B158909 8 Oz Beeswax Salad Bowl Finish Finish - CLAPHAM'S Our food-grade Beeswax/Carnauba/Mineral oil finish is suitable for all things wooden in the kitchen. The finish protects the wood and gives it a soft lustrous shine. It is suitable for salad...
    B158909
    CAD $24.99
    Add to Cart
  • SAND MASTER 11 1/2IN. OA LENGTH SORBY
    Add to Cart

    SAND MASTER 11 1/2IN. OA LENGTH SORBY

    CAD $98.99
    410 Sand Master - ROBERT SORBY To put a fine finish on turning work and eliminate sanding lines. Velcro 2" sponge pad mounted on phosphor bronze bearing gives excellent service. Total Length: 11-1/2" Handle: 8-1/2"
    410
    CAD $98.99
    Add to Cart
  • SANDER 1IN. X30IN. BELT AND 5IN. DISC CSA
    Add to Cart

    Craftex

    SANDER 1IN. X30IN. BELT AND 5IN. DISC CSA CT170N

    Now: CAD $149.00
    Was: $169.00
    CT170N 1" x 30" Belt and 5" Disc Sander - CRAFTEX The CT170N is equipped with a powerful 1/3-HP, 120-Volt motor which spins the 5” sanding disc and the 1” x 30” sanding belt for fast stock removal. This combination belt/disc sander...
    CT170N
    Now: CAD $149.00
    Was: $169.00
    Add to Cart
  • SANDER 5IN. RANDOM ORBITAL MAKITA
    Add to Cart

    Makita

    SANDER 5IN. RANDOM ORBITAL MAKITA

    CAD $109.00
    BO5030   5" Random Orbit Sander - MAKITA   Large 1/8" random orbit action for fast and super smooth sanding Pad control system for controlled pad speed upon start-up Efficient through-the-pad dust collection system for a cleaner work...
    BO5030
    CAD $109.00
    Add to Cart
  • SANDER BELT AND DISC COMBO CSA CRAFTEX CX501
    Add to Cart

    Craftex CX Series

    SANDER BELT AND DISC COMBO CSA CRAFTEX CX501

    Now: CAD $1,599.00
    Was: $1,699.00
    CX501 12” Disc & Belt Sander Combo - Craftex CX-Series The combination of a heavy duty disc and belt sander makes this machine a must for any serious woodworker. The 6” x 48” belt sander features a quick release belt tension for...
    CX501
    Now: CAD $1,599.00
    Was: $1,699.00
    Add to Cart
  • SANDER FINISHING SHEET 1/3 MAKITA
    Add to Cart

    Makita

    SANDER FINISHING SHEET 1/3 MAKITA BO3710

    Now: CAD $95.00
    Was: $109.00
    BO3710 1/3 Sheet Finishing Sander Powerful Motor features increased power input and increased cooling for demanding sanding applications. Redesigned Housing reduces height creating a lower centre of gravity to improve handling and maneuverability...
    BO3710
    Now: CAD $95.00
    Was: $109.00
    Add to Cart
  • SANDING BELT 1IN. X 30IN. 100G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X 30IN. 100G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 B130R100 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 100
    B130R100
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 1IN. X 30IN. 120G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X 30IN. 120G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 120
    B130R120
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 1IN. X 30IN. 150G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X 30IN. 150G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 150
    B130R150
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 1IN. X 30IN. 180G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X 30IN. 180G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 B130R180 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 180
    B130R180
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 1IN. X 30IN. 220G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X 30IN. 220G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 B130R220 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 220
    B130R220
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 1IN. X 30IN. 80G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X 30IN. 80G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 80
    B130R80
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 1IN. X30IN. X60G
    Add to Cart

    Primex Abrasives

    SANDING BELT 1IN. X30IN. X60G

    Now: CAD $3.29
    Was: $3.99
    Bulk Discount: Buy 5 or more of the same grit for only $1.99 each. Simply add 5 or more of this item to your cart to qualify. Promotion valid until January 6th, 2023 Aluminum Oxide Abrasive Belt 1" X 30" Sanding Belt. Grit: 60
    B130R60
    Now: CAD $3.29
    Was: $3.99
    Add to Cart
  • SANDING BELT 3 X 21 100G
    Add to Cart

    Klingspor

    SANDING BELT 3 X 21 100G

    CAD $5.99
    Aluminum Oxide Abrasive Belt 3” x 21” Replacement belt for the BE321 belt sander. Grit: 100
    BE321100
    CAD $5.99
    Add to Cart
  • SANDING BELT 3 X 21 120G
    Add to Cart

    Klingspor

    SANDING BELT 3 X 21 120G

    CAD $5.99
    Aluminum Oxide Abrasive Belt 3” x 21” Replacement belt for the BE321 belt sander. Grit: 120
    BE321120
    CAD $5.99
    Add to Cart
  • SANDING BELT 3 X 21 150G
    Add to Cart

    Klingspor

    SANDING BELT 3 X 21 150G

    CAD $5.99
    Aluminum Oxide Abrasive Belt 3” x 21” Replacement belt for the BE321 belt sander. Grit: 150
    BE321150
    CAD $5.99
    Add to Cart
  • SANDING BELT 3 X 21 180G
    Add to Cart

    Klingspor

    SANDING BELT 3 X 21 180G

    CAD $5.99
    Aluminum Oxide Abrasive Belt 3” x 21” Replacement belt for the BE321 belt sander. Grit: 180
    BE321180
    CAD $5.99
    Add to Cart
  • SANDING BELT 3 X 24 100G
    Add to Cart

    Primex Abrasives

    SANDING BELT 3 X 24 100G

    Now: CAD $4.29
    Was: $4.99
    These sanding belts are tough and durable and feature an Aluminium Oxide grain with resin bonding on strong weight poly/cotton backing ideal for use on ferrous, non-ferrous metals, carbon steel, stainless steel, aluminium and hardwoods...
    B1002100
    Now: CAD $4.29
    Was: $4.99
    Add to Cart
  • SANDING BELT 3IN. X 24IN. 120G
    Add to Cart

    Primex Abrasives

    SANDING BELT 3IN. X 24IN. 120G

    Now: CAD $4.29
    Was: $4.99
    These sanding belts are tough and durable and feature an Aluminium Oxide grain with resin bonding on strong weight poly/cotton backing ideal for use on ferrous, non-ferrous metals, carbon steel, stainless steel, aluminum and hardwoods.  Made...
    B1002120
    Now: CAD $4.29
    Was: $4.99
    Add to Cart
  • SANDING BELT 3IN. X 24IN. 150G
    Add to Cart

    Primex Abrasives

    SANDING BELT 3IN. X 24IN. 150G

    Now: CAD $4.29
    Was: $4.99
    These sanding belts are tough and durable and feature an Aluminium Oxide grain with resin bonding on strong weight poly/cotton backing ideal for use on ferrous, non-ferrous metals, carbon steel, stainless steel, aluminium and hardwoods...
    B1002150
    Now: CAD $4.29
    Was: $4.99
    Add to Cart
  • SANDING BELT 3IN. X 24IN. 40G
    Add to Cart

    Primex Abrasives

    SANDING BELT 3IN. X 24IN. 40G

    Now: CAD $4.29
    Was: $4.99
    These sanding belts are tough and durable and feature an Aluminium Oxide grain with resin bonding on strong weight poly/cotton backing ideal for use on ferrous, non-ferrous metals, carbon steel, stainless steel, aluminium and hardwoods...
    B100240
    Now: CAD $4.29
    Was: $4.99
    Add to Cart
  • SANDING BELT 3IN. X 24IN. 60G
    Add to Cart

    Primex Abrasives

    SANDING BELT 3IN. X 24IN. 60G

    Now: CAD $4.29
    Was: $4.99
    These sanding belts are tough and durable and feature an Aluminium Oxide grain with resin bonding on strong weight poly/cotton backing ideal for use on ferrous, non-ferrous metals, carbon steel, stainless steel, aluminum and hardwoods.  Made...
    B100260
    Now: CAD $4.29
    Was: $4.99
    Add to Cart
  • SANDING BELT 3IN. X 24IN. 80G
    Add to Cart

    Primex Abrasives

    SANDING BELT 3IN. X 24IN. 80G

    Now: CAD $4.29
    Was: $4.99
    These sanding belts are tough and durable and feature an Aluminium Oxide grain with resin bonding on strong weight poly/cotton backing ideal for use on ferrous, non-ferrous metals, carbon steel, stainless steel, aluminum and hardwoods.  Made...
    B100280
    Now: CAD $4.29
    Was: $4.99
    Add to Cart

Busy Bee Tools has the woodworking machines and tools that every serious woodworker is after. With a wide selection of band saws, table saws, planers, jointers, sanders, shapers, router tables, wood lathes and more, you can count on Busy Bee Tools for your woodworking needs. Our two in house brands, Craftex and Craftex CX-Series feature two and three year warranties respectively and these in house brands are bought and sold directly to the end user, avoiding middleman markups and saving you money. For the serious woodworker, Busy Bee Tools is the number one choice.

Subscribe to our newsletter

Sign up to our newsletter to get the latest updates on new products and upcoming sales delivered to your inbox. We respect your privacy, we will never share or sell your email.

WHY SHOP WITH US
QUALITY STAFF
ESTABLISHED 1976
100% CANADIAN
ACROSS CANADA
BUY DIRECT & SAVE
Crown Lubricants
DeWalt
Stanley